MYIR MYS-6ULX-IOT
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| MYS-6ULX-IOT Single Board Computer | |
| Homepage | |
| Platform | |
| Brand • Model • Rev |
MYIR MYS-6ULX-IOT |
| FCC ID |
none specified |
| Type |
single-board computer |
| Wireless class |
N150 |
| CPU1 |
Freescale (NXP) i.MX6ULL |
| CPU1 Speed |
528 MHz |
| Flash1 Chip |
Micron MT29F2G08ABAEA |
| Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Samsung K4B2G1646F-BYK0 |
| ETH chip1 |
Freescale (NXP) i.MX6ULL |
| ETH chip2 |
SMSC LAN8720A |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot 2016.03 |
| Stock FW OS |
Linux 4.1.15 Freescale i.MX Release Distro |
| Expansion IF types |
USB 2.0, USB 2.0 (OTG), Micro SD Card slot |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 3-pin header, populated, 3.3V TTL, (115200 8N1), JP1 |
| Flags |
Micro SD Card slot, UART, I2C, CAN, SPI, ADC, I2S, GPIO |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
acquired via DHCP |
| Default login user |
root |
| Default login password |
"none" |
| Manuf/OEM/ODM |
MYIR |
| Retail | |
| (Est.) release date | April 2017 |
| (Est.) initial retail price (in USD): |
$25 |
| Country of manuf | China |
| Radio 1 | |
| Radio1 module | |
| Radio1 module IF |
USB 2.0 (module) |
| Chip1 |
Realtek RTL8188ETV |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
Overview
See also: List of Single-board computers
Hardware specification
- CPU: Freescale (NXP) i.MX6ULL Cortex-A7 @528MHz
- GPU: Qualcomm Adreno 306 @400Mhz
- Memory: 256MB (SDRAM) DDR3L
- Onboard Storage: 256MB NAND, TF card (max. 128GB) / MMC card slot
- Wifi: 802.11bgn
- Network: 1x Fast Ethernet
- USB: 1x USB 2.0, 1x USB OTG
- Power Source: DC Jack 5V or USB Female Micro-B
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2022) |
Reverting
This section is empty. You can help by adding to it. (July 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2022) |
USB Info
This section is empty. You can help by adding to it. (July 2022) |
vlan Info
This section is empty. You can help by adding to it. (July 2022) |
Pictures
This section is empty. You can help by adding to it. (July 2022) |
Notes
This section is empty. You can help by adding to it. (July 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2022) |
See also
This section is empty. You can help by adding to it. (July 2022) |
Categories:
- MYIR
- Embedded system/single-board computer
- Embedded System Freescale (NXP)
- Embedded System i.MX6ULL
- Embedded System SMSC
- Embedded System LAN8720A
- Manuf MYIR
- Embedded System Realtek
- Embedded System RTL8188ETV
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Freescale (NXP)
- SMSC
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation