Linksys X2000 v2
From TechInfoDepot
Jump to navigationJump to search
bgn | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wireless-N ADSL 2+ Modem Router | |||||||||||||
|
| |||||||||||||
| Support | |||||||||||||
| Wikipedia | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Linksys X2000 v2 | ||||||||||||
| FCC ID | |||||||||||||
| IC ID | |||||||||||||
| Type |
wireless router, dsl modem | ||||||||||||
| Wireless class |
N300 | ||||||||||||
| CPU1 |
Broadcom BCM63281 | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
? MiB | ||||||||||||
| RAM1 Chip |
EtronTech Model? | ||||||||||||
| ETH chip1 |
Broadcom BCM63281 | ||||||||||||
| Switch |
Broadcom BCM63281 | ||||||||||||
| Ethernet Port Count |
3-100MbE-LAN | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
12 VDC, 1 A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Flags |
ADSL2+ | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.1.1 | ||||||||||||
| Default login user |
admin | ||||||||||||
| Default login password |
admin | ||||||||||||
| Manuf/OEM/ODM | |||||||||||||
| Retail | |||||||||||||
| FCC approval date | 08 July 2011 | ||||||||||||
| ASIN |
B005HFJFHW | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Broadcom BCM43225 | ||||||||||||
| Wireless interface OUI |
98:FC:11 | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
2x2:2 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"P/N: 141750420001J REV: 01A" is silkscreened on the board.
Per the manual on the SSID, "The default is Cisco followed by the last 5 digits of the router’s serial number, which is found on the bottom of the router".
Links of Interest
This section is empty. You can help by adding to it. (June 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2022) |
Reverting
This section is empty. You can help by adding to it. (June 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (June 2022) |
USB Info
This section is empty. You can help by adding to it. (June 2022) |
vlan Info
This section is empty. You can help by adding to it. (June 2022) |
Pictures
This section is empty. You can help by adding to it. (June 2022) |
Notes
This section is empty. You can help by adding to it. (June 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2022) |
See also
This section is empty. You can help by adding to it. (June 2022) |
Categories:
- Linksys
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM63281
- Manuf Arcadyan
- Embedded System BCM43225
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation