Linksys WRT54G3GV2-ST
From TechInfoDepot
Jump to navigationJump to search
bg | |
|---|---|
| Wireless-G Router for Mobile Broadband | |
| Support | |
| Wikipedia | |
| Platform | |
| Brand • Model • Rev |
Linksys WRT54G3GV2-ST v1.0 |
| Serial number prefix |
CSC0 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| Wireless class |
G54 |
| CPU1 |
Broadcom BCM4704 |
| Flash1 Chip |
Spansion S29GL128N10TFI01 |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Mira P2S28D40CTP-G5 x 2 |
| ETH chip1 |
Broadcom BCM4704 |
| Switch |
Broadcom BCM5325F |
| Ethernet Port Count |
1-WAN 4-100MbE-LAN |
| Expansion IF types |
USB 2.0, PCMCIA (32-bit) |
| PCMCIA slots |
1 |
| USB ports |
3 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.1 |
| Default login user |
Leave blank |
| Default login password |
admin |
| Default SSID |
LinksysXXXX |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 17 October 2007 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM4318E |
| Wireless interface OUI |
00:21:29 |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"3763-12140203R REV:XC" is silkscreened on the board.
WRT54G3GV2-ST serial numbers appear to start with CSC0.
The device uses a NEC D720102GC USB 2.0 controller chip and a Texas Instruments PCI1510 CardBus controller chip.
The default SSID is LinksysXXXX where XXXX is the last two octets of the wireless interface MAC (upper case letters).
Links of Interest
WRT54G3GV2-VF on the OpenWrt wiki
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2022) |
Reverting
This section is empty. You can help by adding to it. (June 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (June 2022) |
USB Info
This section is empty. You can help by adding to it. (June 2022) |
vlan Info
This section is empty. You can help by adding to it. (June 2022) |
Pictures
- external
- internal
Notes
This section is empty. You can help by adding to it. (June 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2022) |
See also
This section is empty. You can help by adding to it. (June 2022) |
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4704
- Embedded System BCM5325F
- Manuf CyberTAN
- Embedded System BCM4318E
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation