Linksys WET11 v1
From TechInfoDepot
Jump to navigationJump to search
b | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wireless-G Business Ethernet Bridge | |||||||||||||
| Support | |||||||||||||
| Wikipedia | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Linksys WET11 v1 | ||||||||||||
| FCC ID | |||||||||||||
| Type |
bridge | ||||||||||||
| Wireless class |
B11 | ||||||||||||
| CPU1 |
Ubicom IP2022 | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
? MiB | ||||||||||||
| RAM1 Chip |
Brand? Model? | ||||||||||||
| ETH chip1 |
Ubicom IP2022 | ||||||||||||
| Ethernet Port Count |
1-LAN | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Expansion IF types |
PCMCIA (16-bit) | ||||||||||||
| PCMCIA slots |
1 | ||||||||||||
| Power |
? VDC, ? A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Flags |
schematics, block diagram | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
???.???.???.??? | ||||||||||||
| Default SSID |
linksys | ||||||||||||
| Manuf/OEM/ODM | |||||||||||||
| Retail | |||||||||||||
| FCC approval date | 07 February 2002 | ||||||||||||
| Country of manuf | Taiwan | ||||||||||||
| Radio 1 | |||||||||||||
| Radio1 module | |||||||||||||
| Radio1 module IF |
PCMCIA (16-bit) | ||||||||||||
| Chip1 |
Intersil ISL3873 | ||||||||||||
| Chip2 |
Intersil ISL3685 | ||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||
| Antenna Connector Type |
MMCX, RP-SMA | ||||||||||||
| Wireless Standard |
IEEE 802.11b | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
Overview
"WE252-IF REV: XB" is silkscreened on the wireless module in the FCC photos.
Hacking the WET11 v1 (replacing the wireless module with a Senao SL-2511CD PLUS EXT2)
There are likely multiple revisions of this device.
- BBQ002... S/N
- FCC ID: PKW-WM11 (BroMax WM302-IF [PRISM 3 (ISL3871IN33)] module)
- 00:06:25 OUI
Per the FCC manual, the default SSID is linksys.
Links of Interest
This section is empty. You can help by adding to it. (June 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2022) |
Reverting
This section is empty. You can help by adding to it. (June 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (June 2022) |
USB Info
This section is empty. You can help by adding to it. (June 2022) |
vlan Info
This section is empty. You can help by adding to it. (June 2022) |
Pictures
This section is empty. You can help by adding to it. (June 2022) |
Notes
This section is empty. You can help by adding to it. (June 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2022) |
See also
This section is empty. You can help by adding to it. (June 2022) |
Categories:
- Linksys
- Embedded system/bridge
- Embedded System Ubicom
- Embedded System IP2022
- Manuf BroMax
- Embedded System Intersil
- Embedded System ISL3873
- Embedded System ISL3685
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Ubicom
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation