Linksys WAP300N
From TechInfoDepot
Jump to navigationJump to search
abgn | |
|---|---|
| Wireless-N Access Point | |
| Support | |
| Wikipedia | |
| Platform | |
| Brand • Model • Rev |
Linksys WAP300N |
| FCC ID | |
| IC ID | |
| Type |
access point |
| Wireless class |
AN600 |
| CPU1 |
Ralink RT6856 |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Winbond W9751G6KB-25 |
| ETH chip1 |
Ralink RT6856 |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 0.5 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
10.100.1.1 |
| Default login user |
Leave blank |
| Default login password |
admin |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 05 December 2012 |
| (Est.) release date | 30 April 2013 |
| UPC |
745883597208 (UPC DB, On eBay) |
| ASIN |
B00BK0YRZS |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 |
Ralink RT5592 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/b/g/n |
| 802.11n |
up to 300/300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
2.4 or 5 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
The Cisco logo and "0500-2130741000" is silkscreened on the board in the FCC photos.
The FCC test report would seem to indicate that this device is using RT5592. It is presumed to be using this chip..
Per the manual..
- the device will attempt to acquire an IP address via DHCP by default. if it fails, the IP will be set to 10.100.1.1.
Wi-Fi Certified : WFA16767 (as of 12/11/2012)
Links of Interest
This section is empty. You can help by adding to it. (June 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2022) |
Reverting
This section is empty. You can help by adding to it. (June 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (June 2022) |
USB Info
This section is empty. You can help by adding to it. (June 2022) |
vlan Info
This section is empty. You can help by adding to it. (June 2022) |
Pictures
This section is empty. You can help by adding to it. (June 2022) |
Notes
This section is empty. You can help by adding to it. (June 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2022) |
See also
This section is empty. You can help by adding to it. (June 2022) |
Categories:
- Linksys
- Embedded system/access point
- Embedded System Ralink
- Embedded System RT6856
- Manuf U-MEDIA
- Embedded System RT5592
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Dual-Band
- Ralink
- Embedded System
- Wi-Fi Certified
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation