Linksys NMH410
| This entry is actively undergoing a major edit for a short while. To help avoid edit conflicts, please do not edit this page while this message is displayed. This page was last revised at 14:04, 31 July 2021 (UTC) (16 months ago). Please remove this template if this page hasn't been edited in several hours. If you are the editor who added this template, please be sure to remove it or replace it with {{Underconstruction}} between editing sessions. |
| Media Hub with LCD | |
| Wikipedia | |
|---|---|
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Linksys NMH410 |
| FCC ID |
none specified |
| Type |
NAS |
| Series |
NMH400 |
| CPU1 |
Marvell 88F5182 |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
PMC Pm39LV040-70VCE |
| Flash1 Size |
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> |
| Flash2 Chip |
Samsung K9F1208UOC-PCB0 |
| Flash2 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
Samsung K4T51163QG-HCE6 x 2 |
| ETH chip1 |
Marvell 88F5182 |
| ETH chip2 |
Marvell 88E1118 |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.4 |
| Stock FW OS |
Linux 2.6.22.19 |
| Expansion IF types |
USB 2.0, SATA, CompactFlash, Micro SD Card slot |
| USB ports |
2 |
| Compact Flash Slots |
1 |
| SD/MMC Slots |
1 |
| SATA Ports |
2 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 5 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 10-pin header, populated, (115200,8,N,1), JP2 |
|
Flags: RTC w/ battery backup, SD Card slot, CompactFlash, LCD Display, fan | |
|
Additional chips | |
|
| |
| Retail | |
| Availability | End of Life |
| (Est.) release date | November 2008 |
| Newegg | N82E16833124341 |
| ASIN |
B001M0MPKK |
| Country of manuf | China |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Linksys device with specifications, see Linksys.
Overview
"P/N:DA0JN3MB4D0" and "Rev:D" are silkscreened on the main board.
"P/N:DA0JN3TH4B0" and "Rev:C"are silkscreened on the SD/CF board.
Hardware specification
- CPU: Marvell 88F5182 ARM5 (@400MHz)
- Memory: 128MB (SDRAM) DDR
- Storage: 512KiB CMOS Flash, 64MB NAND Flash, 2x SATA
- Network: 1x Gigabit Ethernet port
- Power: 15V, 5A via barrel
Links of Interest
This section is empty. You can help by adding to it. (July 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2021) |
Reverting
This section is empty. You can help by adding to it. (July 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2021) |
USB Info
This section is empty. You can help by adding to it. (July 2021) |
vlan Info
This section is empty. You can help by adding to it. (July 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (July 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2021) |
See also
This section is empty. You can help by adding to it. (July 2021) |