Linksys E900
| Wireless-N300 Router | |
| Wikipedia | |
|---|---|
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Status Unknown |
| Tomato any flavor | |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Linksys E900 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| CPU1 |
Broadcom BCM5357C0 |
| CPU1 Speed |
300 MHz |
| Flash1 Chip |
Winbond 25Q64BVSIG |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9425G6JH-5 |
| ETH chip1 |
Broadcom BCM5357C0 |
| Switch |
Broadcom BCM5357C0 |
| Ethernet Port Count |
1-10/100/1000"10/100/1000" is not in the list (0, 10MbE, 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE, 20GbE, 25GbE, 1x 1GbE + 1x 10GbE, ...) of allowed values for the "WAN speed" property.-WAN 4-10/100/1000"10/100/1000" is not in the list (0, 10MbE, 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE, 20GbE) of allowed values for the "LAN speed" property.-LAN |
| Expansion IF types |
none specified |
| Power |
12 VDC, 0.5 A |
| Connector type |
barrel |
| Other | |
|
Default IP address: 192.168.1.1 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 29 November 2011 |
| (Est.) release date | 09 March 2012 |
| UPC |
745883594641 (UPC DB, On eBay) |
| ASIN |
B007IL764W |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM5357C0 |
| Wireless interface OUI |
20:AA:4B |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
Wikidevi Notes
On the DD-WRT forums (boot log, CFE dump)
- "3763-11900102R" is silkscreened on the board
- This is the same CyberTAN board P/N as the Linksys E800 and the Linksys E1200 v2.
- 20:AA:4B OUI
Supported by RAF builds of Tomato by Victek.
Supported by K26RT-N builds of Tomato by Shibby.
Supported by OpenWRT, however as of version 15.05 the wireless radio does not work and pretty much routing is very slow to the point of being unusable. It probably will never be fixed. Do not bother trying.
The default SSID is probably CiscoXXXXX where XXXXX is the last 5 digits of the serial number. If the device has been configured with Cisco Connect the device will probably have a randomly generated SSID.
Links of Interest
This section is empty. You can help by adding to it. (4 July 2019) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
This section is empty. You can help by adding to it. (4 July 2019) |
Flashing Tomato
This section is empty. You can help by adding to it. (4 July 2019) |
Upgrading
This section is empty. You can help by adding to it. (4 July 2019) |
Reverting
This section is empty. You can help by adding to it. (4 July 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (4 July 2019) |
USB Info
This section is empty. You can help by adding to it. (4 July 2019) |
vlan Info
This section is empty. You can help by adding to it. (4 July 2019) |
Pictures
This section is empty. You can help by adding to it. (4 July 2019) |
Notes
This section is empty. You can help by adding to it. (4 July 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (4 July 2019) |
See Also
This section is empty. You can help by adding to it. (4 July 2019) |
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5357C0
- Manuf CyberTAN
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wired Embedded System
- Broadcom
- Embedded System
- Articles to be expanded from 4 July 2019
- Articles with empty sections from 4 July 2019
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation