Linksys E2500 v1
From TechInfoDepot
| Advanced Dual-Band N Router | |
|
| |
| Support | |
|---|---|
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Status Unknown |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Linksys E2500 v1 |
| Serial number prefix |
10A10 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| CPU1 |
Broadcom BCM5358UB0 |
| CPU1 Speed |
300 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Broadcom BCM5358UB0 |
| Switch |
Broadcom BCM5358UB0 |
| Ethernet Port Count |
1-10/100"10/100" is not in the list (0, 10MbE, 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE, 20GbE, 25GbE, 1x 1GbE + 1x 10GbE, ...) of allowed values for the "WAN speed" property.-WAN 4-10/100"10/100" is not in the list (0, 10MbE, 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE, 20GbE) of allowed values for the "LAN speed" property.-LAN |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Other | |
|
Default IP address: 192.168.1.1 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support |
Tomato (Shibby) • (List | DLs), TomatoUSB RAF (Victek) • (List | DLs), Tomato (Hyzoom) • (Tomato (Shibby) mod) |
| Retail | |
| Availability | common |
| FCC approval date | 04 March 2011 |
| (Est.) release date | 04 April 2011 |
| UPC |
745883592371 (UPC DB, On eBay) |
| ASIN |
B004T9RR4A |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM5358UB0 |
| Wireless interface OUI |
20:AA:4B, 58:6D:8F, C0:C1:C0 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Broadcom BCM43236 |
| Wireless interface OUI |
20:AA:4B, 58:6D:8F, C0:C1:C0 |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
Overview
This section is empty. You can help by adding to it. (October 2020) |
Links of Interest
- "3763-30000302R" or "3763-30000303R" is silkscreened on the board.
- C0:C1:C0 OUI and 300MHz CPU in the boot log
The E2500v1 would appear to be experimentally supported by Shibby's Tomato RT-N builds.
The E2500v1 is [1] supported. Victek RAF versions.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5358UB0
- Manuf CyberTAN
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM43236
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wired Embedded System
- Broadcom
- Embedded System
- FCC Photo's Needed
- English Documentation