Linksys E1550
From TechInfoDepot
Jump to navigationJump to search
bgn | |
|---|---|
| Wireless-N Router with SpeedBoost | |
| Support | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Status Unknown |
| Tomato any flavor | |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Linksys E1550 |
| Serial number prefix |
10C10 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| Wireless class |
N300 |
| CPU1 |
Broadcom BCM5358UB0 |
| Flash1 Chip |
Winbond 25Q128BVFG |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
EtronTech EM6AB160TSC-5G |
| ETH chip1 |
Broadcom BCM5358UB0 |
| Switch |
Broadcom BCM5358UB0 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.1 |
| Default login user |
Leave blank |
| Default login password |
admin |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 28 January 2011 |
| UPC |
745883592395 (UPC DB, On eBay) |
| ASIN |
B00630RVJO |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM5358UB0 |
| Wireless interface OUI |
C0:C1:C0 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
- E1550 v1 serials appear to start with 10C10
Supported by K26RT-N builds of Tomato by Shibby.
"3763-11600102R" is silkscreened on the board in the FCC photos.
Links of Interest
This section is empty. You can help by adding to it. (October 2019) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
This section is empty. You can help by adding to it. (October 2019) |
Flashing Tomato
This section is empty. You can help by adding to it. (October 2019) |
Upgrading
This section is empty. You can help by adding to it. (October 2019) |
Reverting
This section is empty. You can help by adding to it. (October 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2019) |
USB Info
This section is empty. You can help by adding to it. (October 2019) |
vlan Info
This section is empty. You can help by adding to it. (October 2019) |
Pictures
This section is empty. You can help by adding to it. (October 2019) |
Notes
This section is empty. You can help by adding to it. (October 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2019) |
See also
This section is empty. You can help by adding to it. (October 2019) |
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5358UB0
- Manuf CyberTAN
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation