Linksys E1500
From TechInfoDepot
Jump to navigationJump to search
bgn | |
|---|---|
| Wireless-N Router with SpeedBoost | |
|
| |
| Support | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor | |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Linksys E1500 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| Wireless class |
N300 |
| CPU1 |
Broadcom BCM5357B0 |
| Flash1 Chip |
Winbond W25Q64BVSIG |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9425G6JH-5 |
| ETH chip1 |
Broadcom BCM5357B0 |
| Switch |
Broadcom BCM5357B0 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Expansion IF types |
none specified |
| Power |
12 VDC, 0.5 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.1 |
| Default login user |
Leave blank |
| Default login password |
admin |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 07 January 2011 |
| (Est.) release date | 04 April 2011 |
| Newegg | N82E16833124413 |
| ASINs |
B009PLCYKE B004T9RR0E |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM5357B0 |
| Wireless interface OUI |
C0:C1:C0 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"3763-11500101R" is silkscreened on the board in the FCC photos.
- Example serial number: 10910C14183103
Many devices have Cisco logo and Cisco brand name above the model number which is "Linksys E1500" Only one version (v1) was ever made.
Links of Interest
Supported by K26RT-N builds of Tomato by Shibby.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
This section is empty. You can help by adding to it. (October 2019) |
Flashing Tomato
This section is empty. You can help by adding to it. (October 2019) |
Upgrading
This section is empty. You can help by adding to it. (October 2019) |
Reverting
This section is empty. You can help by adding to it. (October 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2019) |
Serial
Serial Pinouts
| 1 | 2 | 3 | 4 | 5 |
| Vcc (3.3V) | TXD | RXD | NC | GND |
Serial Recovery
| Speed | Bits | Stop Bits | Parity | Flow Control |
|---|---|---|---|---|
| 115200 | 8 | 1 | None | None |
Serial console output
| Serial console output
|
|---|
CFE version 5.60.120.24 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 08/02/11 13:55:12 CST (root@cybertan)
Copyright (C) 2000-2008 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 8MB ST compatible serial flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 007EFFFF (8060900)
nvram #03 007F0000 -> 007FFFFF (65536)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 007EFFFF (8060928)
nvram #02 007F0000 -> 007FFFFF (65536)
BCM47XX_GMAC_ID
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.24
CPU type 0x19749: 300MHz
Total memory: 32768 KBytes
CFE mem: 0x80700000 - 0x807B0A10 (723472)
Data: 0x80745D20 - 0x80749D50 (16432)
BSS: 0x80749D50 - 0x8074AA10 (3264)
Heap: 0x8074AA10 - 0x807AEA10 (409600)
Stack: 0x807AEA10 - 0x807B0A10 (8192)
Text: 0x80700000 - 0x80745D14 (285972)
Boot version: v5.3.5
The boot is CFE
mac_init(): Find mac [20:aa:4b:1d:92:66] in location 0
Nothing...
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=2 ###
### Change it to 0x20e0842 (2) ###
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 20-AA-4B-1D-92-66, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Len: 0x3B0000 (3866624) (0xBC040000)
Offset0: 0x1C (28) (0xBC04001C)
Offset1: 0x8BC (2236) (0xBC0408BC)
Offset2: 0x88FFC (561148) (0xBC0C8FFC)
Header CRC: 0x58F83D5F
Calculate CRC: 0x58F83D5F
Image 1 is OK
Try to load image 1.
Waiting for 3 seconds to upgrade ...
CMD: [load -raw -addr=0x807b0a10 -max=0x184f5f0 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
### Start=253973231 E=570696591 Delta=316723360 ###
Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x6ff000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3592 bytes read
### Start=575593931 E=577881869 Delta=2287938 ###
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00019749, options: 0x000021cd
|
USB Info
This section is empty. You can help by adding to it. (October 2019) |
vlan Info
This section is empty. You can help by adding to it. (October 2019) |
Pictures
This section is empty. You can help by adding to it. (October 2019) |
- Internal
Notes
This section is empty. You can help by adding to it. (October 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2019) |
See also
This section is empty. You can help by adding to it. (October 2019) |
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5357B0
- Manuf CyberTAN
- DD-WRT Supported
- OpenWrt Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation