Linksys BEFCMU10 v3
From TechInfoDepot
Jump to navigationJump to search| cable modem | |
| Wikipedia | |
|---|---|
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Linksys BEFCMU10 v3 |
| Type |
cable modem |
| CPU1 |
Broadcom BCM3348 |
| Flash1 Chip |
AMD Model? |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip |
EtronTech EM638165TS-7 |
| ETH chip1 |
Broadcom BCM3348 |
| Ethernet Port Count |
1-100MbE-LAN |
| Expansion IF types |
USB (unk. standard - slave) |
| USB ports |
1 |
| USB Hub Compatible |
No |
| Power |
12 VDC, 0.6 A |
| Connector type |
barrel, reverse gender core |
| Serial Port (UART) |
yes, internal, 4-pin header, connectorized, populated |
| Flags |
schematics, block diagram, DOCSIS 2.0 |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Manuf/OEM/ODM |
Askey CME105-D40 |
| Retail | |
| FCC approval date | 09 July 2003 |
| Country of manuf | China |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
BEFCMU10v3 S/Ns may start with KBG4.
The FCC docs indicate this device is an Askey CME105-D40. The EUT's board is silkscreened with "3003-000763".
"ID:03-000013", "REV-1A", and "3003-001103" is silkscreened on a production model board.
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
Probable used PSU(s)
The power supply shown with the device in the FCC photos is a Delta Electronics ADP-12SB Rev.B.
| Delta Electronics ADP-12S B (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 50-60 Hz, 0.5 A | |||||
| Input connector: C13 Style: modular, brick | |||||
| Output: 12 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |