LinkSprite Acadia
From TechInfoDepot
Jump to navigationJump to search
|
LinkSprite Acadia Embedded Single Board Computer | |
|
| |
| Homepage | |
|---|---|
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
LinkSprite Acadia V3.0 |
| Type |
single-board computer |
| CPU1 |
Freescale (NXP) i.MX6Q |
| CPU1 Type |
ARM Cortex A9 |
| CPU1 Speed |
1.2 GHz ( 4 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> |
| RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Type |
DDR3 |
| RAM1 Chip |
Micron MT41K128M16JT-125 x 4 |
| ETH chip1 |
Freescale (NXP) i.MX6Q |
| ETH chip2 |
Atheros AR8031 |
| Ethernet Port Count |
1-1GbE-LAN |
|
| |
| Stock bootloader |
U-Boot 2009.08 |
| Stock FW OS |
Linux 3.0.35 Ubuntu 12.04 |
| Expansion IF types |
USB 2.0, USB 2.0 (OTG), SATA, Arduino Expansion, MicroSD Card slot |
| USB ports |
3 |
| SD/MMC Slots |
1 |
| SATA Ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 2 A |
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 3-pin header, populated, 3.3V TTL, (115200 8N1) |
| Flags |
HDMI 1.4, LVDS, MIPI CSI, Audio out 3.5mm jack, IR receiver |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Default login user |
root |
| Default login password |
linaro |
| 3rd Party Firmware Support |
Android 4.4 |
| Retail | |
| (Est.) release date | October 2014 |
| ASIN |
B017VJ9URG |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
Overview
"pcDuino Acadia 1 V3.0" and "www.pcduino.com" are silkscreened near the IR receiver.
Links of Interest
News
- pcDuino Acadia 1 is a Freescale i.MX6 Quad Development Board with Arduino Headers on CNX|Software
- pcDuino SBC adopts i.MX6 Quad, loads up on storage on LinuxGizmos
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2021) |
Reverting
This section is empty. You can help by adding to it. (July 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2021) |
USB Info
This section is empty. You can help by adding to it. (July 2021) |
vlan Info
This section is empty. You can help by adding to it. (July 2021) |
Pictures
Notes
Specifications
- CPU: NXP i.MX6Q Quad (MCIMX6Q6AVT10C)
- @1GHz Quad-Core (ARM Cortex A9)
- GPU: Vivante GC2000 / GC320
- Video decoding 1080p60 H.264
- RAM: 1GB (DDR3) @533MHz
- Storage: SATA, MicroSD (TF) Card
- Video Output: LVDS and HDMI
- Audio Output: Analog via 3.5mm
- Network: 1x Gigabit Ethernet
- USB: 2x USB 2.0, 1x USB (OTG)
- Power: 5V/2A barrel
- Dimensions (L x W): 4.72 x 2.56″
Hardware Modification
This section is empty. You can help by adding to it. (July 2021) |
See also
- LinkSprite pcDuino • PPage
- LinkSprite pcDuino Lite • PPage
- LinkSprite pcDuino Lite WiFi • PPage
- LinkSprite pcDuino1 (v1) • PPage
- LinkSprite pcDuino2 (v2) • PPage
- LinkSprite pcDuino3 • PPage
- LinkSprite pcDuino3B (800) • PPage
- LinkSprite pcDuino3 Nano • PPage
- LinkSprite pcDuino3S • PPage
- LinkSprite pcDuino4 STB • PPage
- LinkSprite pcDuino4 Nano • PPage
- LinkSprite pcDuino8 STB • PPage
- LinkSprite pcDuino8 Uno • PPage
- LinkSprite pcDuino9s • PPage
- LinkSprite pcDuino9 Mini (new) • PPage
- LinkSprite Arches (pcduino8-upper) • PPage
- LinkSprite Acadia (acadia2) • PPage
- LinkSprite Canyonlands • PPage