LaCie d2 Network 2
From TechInfoDepot
Revision as of 03:15, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| LaCie d2 Network 2 | |
|
| |
| Support | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
LaCie d2 Network 2 |
| Type |
NAS |
| CPU1 |
Marvell 88F6281 |
| CPU1 Speed |
1.2 GHz |
| Flash1 Chip |
Macronix 25L4005A |
| Flash1 Size |
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Nanya NT5TU128M8GE-AC x 2 |
| ETH chip1 |
Marvell 88F6281 |
| ETH chip2 |
Marvell 88E1116R |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.4 Marvell version: 3.4.16 LaCie 1.5.20 |
| Stock FW OS |
Linux 2.6.22.18 LSP Version KW LSP 4.2.7 patch2 |
| Expansion IF types |
SATA II, eSATA, USB 2.0 |
| USB ports |
2 |
| SATA Ports |
1 |
| eSATA Ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 3 A |
| Connector type |
barrel |
| JTAG Port |
yes, 8-pin header, unpopulated, J2 |
| Flags |
eSATA |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
acquired via DHCP |
| 3rd Party Firmware Support | |
| Retail | |
| Newegg | N82E16822154434 |
| ASIN |
B0038CRQQS |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
"LaCie Group", "d2Next-NAS KW" and "0901 550 Rev C" are silkscreened on the board.
Links of Interest
This section is empty. You can help by adding to it. (March 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (March 2022) |
Reverting
This section is empty. You can help by adding to it. (March 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (March 2022) |
USB Info
This section is empty. You can help by adding to it. (March 2022) |
vlan Info
This section is empty. You can help by adding to it. (March 2022) |
Pictures
This section is empty. You can help by adding to it. (March 2022) |
Notes
This section is empty. You can help by adding to it. (March 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (March 2022) |
See also
This section is empty. You can help by adding to it. (March 2022) |