LaCie Network Space 2
From TechInfoDepot
Revision as of 18:18, 28 October 2022 by ShadowBot (talk | contribs) (→Hardware Modification: clean up, replaced: {{DoNotRemove}} → {{DoNotRemove|migration}}, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols)
| LaCie Network Space 2 | |
|
| |
| Support | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
LaCie Network Space 2 |
| Type |
NAS |
| CPU1 |
Marvell 88F6281 |
| CPU1 Speed |
800 MHz |
| Flash1 Chip |
Macronix MX25L4005A |
| Flash1 Size |
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
SK hynix HY5PS1G831CFP-S6 x 2 |
| ETH chip1 |
Marvell 88F6281 |
| ETH chip2 |
Marvell 88E1116R |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.4 Marvell 3.4.16 |
| Stock FW OS |
Linux 2.6.31.14 KW LSP 5.0.3 |
| Expansion IF types |
USB 2.0, SATA |
| USB ports |
2 |
| SATA Ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 3 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 8-pin header, populated, 3.3V TTL, (115200 8N1), J2 |
| JTAG Port |
yes, 20-pin header, unpopulated, J12 |
|
Additional chips | |
| Other | |
|
Default IP address: acquired via DHCP | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| (Est.) release date | February 2010 |
| (Est.) initial retail price (in USD): | $160 |
| Newegg | N82E16822154453 |
| ASIN |
B003GQEJ8Y |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented LaCie device with specifications, see LaCie.
Overview
"LaCie", "0901 140", "Rev D", "NS_IS ASTON" are silkscreened on the board.
Hardware
- CPU: Marvell 88F6281 A0 (Kirkwood)
- SoC: ARM926EJ-S (ARMv5TE) @800MHz
- Flash: Macronix MX25L4005CMI-12G (SPI NOR 512kB)
- RAM: SK hynix HY5PS1G831 256MB (DDR2 @267MHz)
- LAN: Marvell 88E1116R (Ethernet Gigabit port PHY)
- SATA: 1x SATA port (2x ports for Network Space Max v2)
- USB: 2x USB 2.0 port (1x Host, 1x Device)
- I2C EEPROM: 512 bytes (Atmel AT24C04 type)
- 2x LEDs (blue and red with CPLD SATA activity blink)
Links of Interest
- LaCie Network Space v2 on the LaCie-NAS Wiki (internal images)
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (March 2022) |
Reverting
This section is empty. You can help by adding to it. (March 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (March 2022) |
USB Info
This section is empty. You can help by adding to it. (March 2022) |
vlan Info
This section is empty. You can help by adding to it. (March 2022) |
Pictures
This section is empty. You can help by adding to it. (March 2022) |
Notes
This section is empty. You can help by adding to it. (March 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (March 2022) |