LaCie 2Big NAS
From TechInfoDepot
Revision as of 03:13, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| LaCie 2Big NAS | |
|
| |
| Support | |
|---|---|
| Platform | |
| Brand • Model • Rev |
LaCie 2Big NAS |
| Type |
NAS |
| CPU1 |
Marvell 88F6282 |
| CPU1 Speed |
2 GHz |
| Flash1 Chip |
Micron 29F2G08ABAEA |
| Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Nanya NT5CB128M8DN-DH x 2 |
| ETH chip1 |
Marvell 88F6282 |
| ETH chip2 |
Marvell 88E1518 |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.4 Marvell 3.5.9 |
| Stock FW OS |
Linux 2.6.31.14 KW LSP 5.0.3 |
| Expansion IF types |
SATA, eSATA, USB 2.0 |
| USB ports |
1 |
| SATA Ports |
2 |
| eSATA Ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 4 A |
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 8-pin header, populated, 3.3V TTL, (115200 8N1), J2 |
| Flags |
eSATA, fan, RTC |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Retail | |
| (Est.) release date | July 2012 |
| (Est.) initial retail price (in USD): |
$209 |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
"2Big-NAS-V2R", "1108 150 Rev B2" and "LaCie Group" are silkscreened on the board.
Specifications
- Network Storage 2-bay
- Processor: Marvell 88F6282 (Armada 300) @2GHz
- Memory: 256MB DDR3; Hard drives: 2x 3.5" (SATA)
- Ports: 1x GbE (RJ45), 1x USB 2.0, 1x eSATA
- LAN: Marvell 88E1318 (Alaska) GbE (10/100/1000)
Links of Interest
Reviews
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (March 2022) |
Reverting
This section is empty. You can help by adding to it. (March 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (March 2022) |
USB Info
This section is empty. You can help by adding to it. (March 2022) |
vlan Info
This section is empty. You can help by adding to it. (March 2022) |
Pictures
This section is empty. You can help by adding to it. (March 2022) |
Notes
This section is empty. You can help by adding to it. (March 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (March 2022) |
See also
This section is empty. You can help by adding to it. (March 2022) |