Kimax U25AWF
From TechInfoDepot
Revision as of 02:28, 24 February 2021 by ShadowBot (talk | contribs) (→top: clean up, replaced: fcc_date → fccapprovdate, manuf_country → countrymanuf, ic_id → icid, cpu1_brand → cpu1brand, cpu1_model → cpu1model, cpu1_cspeed → cpu1spd, fla1_brand → fla1chipbrand, fla1_model → fla1chipmodel, fla1= → flash1size=, ram1= → ram1size=, ram1_brand → ram1chipbrand, ram1_model → ram1chipmodel, expansion_if_types → exp_if_types, expansion_usb_num → exp_usb_num, tp_firmware → tpfirmware, stock_boot= → stock_bootloader=, oui_eth → ethoui, wi1_chip1_brand → rad1chip1bra...)
| mobile NAS | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Kimax U25AWF |
| FCC ID |
none specified |
| Type |
mobile NAS |
| CPU1 | |
| CPU1 Speed |
580 MHz |
| Flash1 Chip |
Macronix MX25L12805D |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot;1.1.3; |
| Stock FW OS |
Linux;3.14.18; |
| Expansion IF types |
USB 2.0, USB 3.0 |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| Connector type |
USB Female Micro-B |
|
Flags: battery, portable | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| ASIN |
B01CTNN07K |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Kimax U25AWF
There is three brend name of this device Kimax/Mixxar/Blueendless
- There is not official site of it.
Kimax U25AWF is a HDD Enclosure with Wi-Fi/Eth conection and battery.
- It has 1x USB 2.0 and 1x USB 3.0 OTG/Charge.
Modes
It has three modes
- 1. HDD Enclosure with USB 2.0 HUB
- 2. NAS
- 2a. Power supply from battery
- 2b. Power supply from USB 3.0 port
- 3. Power bank
Serial Port
Board don`t have pins for serial connection. But you can solder three wires
- (2 micro pad tx, rx and gnd get at any place where you want).
Serial port settings is 57600 8n1 for u-boot and 9600 8n1
- (was found out by "logic analyzer") for firmware
- (settings are changed from start of uploading firmware)
OpenWRT
OEM Firmware
It is OpenWRT with changed WebUI (system version 1.1.6).
- There is not Telnet/SHH.
There is patch supporting all option of this device.
- Checked for Chaos Calmer. All work
Upgrading Firmware
It can be done with OEM WebUI.
Upgrading Bootloader
You can upgrade bootloader from u-boot menu or using programmer.
Vendor links
- Kimax U25AWF on AliExpress (currently selling for ~$45)