Kasda KW5212H
bgn (N300) | |
|---|---|
| Wireless N VDSL2 Modem Router | |
| Homepage | |
| Platform | |
| Brand • Model • Rev |
Kasda KW5212H |
| FCC ID | |
| Type |
wireless router, dsl modem |
| CPU1 |
Broadcom BCM63168 |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
Spansion Model? |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Nanya NT5TU32M16DG-AC |
| ETH chip1 |
Broadcom BCM63168 |
| Switch |
Broadcom BCM63168 |
| Ethernet Port Count |
4-100MbE-LAN |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
|
Flags: VDSL2, block diagram, schematics | |
| Other | |
|
Default SSID: WLAN (16 addl. devices) | |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 03 September 2013 |
| ASIN |
B00HIXOYI6 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM63168 |
| Wireless interface OUI |
00:0E:F4 |
| Antenna Connector Type |
U.FL, RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Kasda device with specifications, see Kasda.
Overview
The device is labeled as a Cyberoam NetGenie in the FCC external photos.
Additional (electrically identical) models of KW5212, NG11VO, and NG11VH are specified in the test report.
- LAN: 4x ports (1x GbE + 3x FE)
Default settings (including the SSID) and the used OUI (00:0E:F4 [Kasda]) are per the FCC manual. They may be inaccurate.
The power adapter shown in the FCC external photos is an unbranded ADS012PM-W 120100 (100-240VAC ~ 50-60Hz, 0.5A -> 12VDC, 1.0A).
US: U5IDL01BKW5212
Links of Interest
This section is empty. You can help by adding to it. (March 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (March 2022) |
Reverting
This section is empty. You can help by adding to it. (March 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (March 2022) |
USB Info
This section is empty. You can help by adding to it. (March 2022) |
vlan Info
This section is empty. You can help by adding to it. (March 2022) |
Pictures
This section is empty. You can help by adding to it. (March 2022) |
Notes
This section is empty. You can help by adding to it. (March 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (March 2022) |
See also
This section is empty. You can help by adding to it. (March 2022) |
- Kasda
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM63168
- Manuf Kasda
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation