iNexQ (Unex) ISW054t

From TechInfoDepot
Revision as of 02:03, 2 September 2022 by ShadowBot (talk | contribs) (→‎top: clean up)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
iNexQ (Unex) ISW054tSerial info
Jump to navigationJump to search
bg
wireless router
Platform
BrandModelRev
iNexQ (Unex) ISW054t
FCC ID
Type
wireless router
Wireless class
G54
CPU1
Silicon Data SD9216-BB
Flash1 Chip
AMD Am29LV800BT-90EC
Flash1 Size
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br />
RAM1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip
EtronTech EM638325TS-6
ETH chip1
Silicon Data SD9216-BB
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN

802dot11 OUI: 00:10:A7 (-, 3 W)
Ethernet OUI: 00:10:A7 (-, 3 W)

Stock FW OS
ThreadX G4.0.4.0
Expansion IF types
Mini PCI
Mini PCI slots
1
Power
9 VDC, 1.5 A
Connector type
barrel
Serial Port (UART)
yes, internal, 6-pin header, (19200,8,N,1), J213
Categorized as
not categorized
Other
Default IP address
192.168.62.1
Default login user
admin
Default login password
1234
Default SSID
WLAN
Retail
FCC approval date 08 October 2003
(Est.) release date October 2003
EAN 4719571030038
(UPC DB, On eBay)
Radio 1
Radio1 module
Radio1 module IF
Mini PCI
Chip1
Intersil ISL3880
Chip2
Intersil ISL3686A
Wireless interface OUI
00:10:A7
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
MSI MP54GS (MS-6818)I4L-MS6818
MSI RG54GS (MS-6822)I4L-MS6818

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Silicon Data chipsets with specifications, see Silicon Data.

Overview

  • "760-05505006 VER:0D" is silkscreened on top the main board.
A sticker with "347 820-05505020 Ver.0E" printed on it is affixed to the bottom of the board.
  • "MS6818" and "VER:100" is silkscreened on the wireless module.
This wireless module is an MSI MP54GS (MS-6818). The FCC ID of the wireless module has been assigned to this entry (there is none on the label).

The firmware on the router used in this entry is 20-06-07T5, dated 2003-10-22.

This device is assumed to be using the ThreadX RTOS based on cursory FW examination..

The version string within the FW is Copyright (c) 1996-2001 Express Logic Inc.
• ThreadX LX4189/Green Hills Version G4.0.4.0 *

Links of Interest

Same author w/ another message on the gpl-violations.org mailing list
the ISW054u would appear to be the same device with a USB port

Flashing

Upgrading

Reverting

JTAG-Serial Info

JTAG

JTAG Pinouts

JTAG Recovery

Serial

Serial Pinouts

J213
(TxD) (GND)
(...) (...)  --> R side (+ end) of board
(RxD) (GND)

Serial Recovery


Info derived from

boot log


Power-On Self Testing...
Testing SYS Controller...
Testing MEM Controller...
SDRAM Configuration:ROW11_COL8_BANK2
Testing SDRAM Memory ...
From 0x80000000 - 0x807FFFFF
Testing CPU Data RAM...
Testing CPU Internal Registers...
Testing Timer 0...
Testing Timer 1...
Testing DMA Controller...
Testing INT Controller...
Testing PCMCIA Controller...
Testing USB Controller...
Testing Ethernet 0 MAC...
Testing Ethernet 1 MAC...
Testing Cardbus...
Testing PCI...
Power-On Self Test Passed

          Bootloader Version 00-03-02, Aug 29 2003 21:45:21

       Copyright 2003. All rights reserved.

Press any key to stop auto-boot...
 0
auto-booting...

========POR reset========

Start of heap: 0x80629f30
End of heap: 0x80800000

Firmware Version: 20-06-07T5, Oct 22 2003 15:46:54
Copyright 2002-2003. All rights reserved.
Scanning PCI Bus...
    scan PCI deviceNo=1
      Found ISL3890 Wireless Device: PCIDEV=1, DEVNUM=4, NICNO=0

WLAN0 Zone Number is 0
******** WLAN Enabled *******
******* AP CONFIG LAUNCHED *******
WLS Channael number is 6
Finished wlan firmware download
Link State: 6c 00 00 00 34 2e
br0: port 0.0.0.1(eth1 rootport) entering listening state
br0: port 0.0.0.2(wls0 rootport) entering listening state
NAT/Firewall starting...
MaxSessionNumber: 65536
NAT/Firewall started!
Now try to get the configuration file...
interface eth1 uses following ip settings: 192.168.62.1/255.255.255.0
Initialization of NAT/Firewall policy database succeeded!
load_pptp_wan: encryption option=e1
br0: port 0.0.0.2(wls0 rootport) entering learning state
br0: port 0.0.0.1(eth1 rootport) entering learning state
br0: port 0.0.0.2(wls0 rootport) entering forwarding state
br0: topology change detected, propagating
br0: port 0.0.0.1(eth1 rootport) entering forwarding state
br0: topology change detected, propagating
SD9218> dhcp_update_table called, iface=1
start_ip=192.168.62.50, end_ip=192.168.62.100
route_cfg_update: dycfg.tx_protocol=0, dycfg.rx_protocol=0, dycfg.mode=0
dhcp_update_table return
bootloader menu + boot params

BOOT> ?
                       Main menu

        ?         - print this menu
        f         - load from Flash and go
        l         - load from TFTP server to SDRAM (no save to Flash, no go)
        L         - load from TFTP server to SDRAM and go (no save to Flash)
        @         - load from TFTP server to SDRAM,save to Flash and go
        g         - go from address
        b         - show boot parameters
        c         - change boot parameters
        d         - display factory default parameters
        m         - modify/set factory default parameters
        p         - ping test (ping other station from the target)
        r         - read memory
        s         - change mac address only
        w         - write memory

BOOT> b

        tftpserver     (R/W)    192.168.62.10
        tftpfile       (R/W)    zrtos.img
        ipaddr         (R/W)    192.168.62.1
        subnetmask     (R/W)    255.255.255.0
        gateway        (R/W)    0.0.0.0


USB Info

vlan Info

Pictures

User Images

Notes

Hardware Modification

See also