HotBrick SoHo 401W
From TechInfoDepot
Jump to navigationJump to searchbg | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| wireless router | |||||||||
| Platform | |||||||||
| Brand • Model • Rev |
HotBrick SoHo 401W | ||||||||
| FCC ID | |||||||||
| Type |
wireless router | ||||||||
| Wireless class |
G54 | ||||||||
| CPU1 |
Marvell 88W8510 | ||||||||
| Flash1 Chip |
Macronix MX29LV800BTTC-70 | ||||||||
| Flash1 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> | ||||||||
| RAM1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||
| RAM1 Chip |
EtronTech EM636165TS-6 | ||||||||
| ETH chip1 |
Marvell 88W8510 | ||||||||
| Switch |
Marvell 88E6060 | ||||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||
| Expansion IF types |
none specified | ||||||||
| Power |
12 VDC, 0.8 A | ||||||||
| Connector type |
barrel | ||||||||
| Categorized as |
not categorized | ||||||||
| Other | |||||||||
| Default IP address |
192.168.0.1 | ||||||||
| Default SSID |
default, Marvell-AP32 | ||||||||
| Manuf/OEM/ODM | |||||||||
| Retail | |||||||||
| FCC approval date | 06 January 2004 | ||||||||
| Country of manuf | Taiwan | ||||||||
| Radio 1 | |||||||||
| Chip1 |
Marvell 88W8510 | ||||||||
| Chip2 |
Marvell Model? | ||||||||
| Wireless interface OUI |
00:C0:02 | ||||||||
| Antenna Connector Type |
none specified | ||||||||
| Wireless Standard |
IEEE 802.11b/g | ||||||||
| 802.11g |
up to 54 Mbps | ||||||||
| 802.11b |
up to 11 Mbps | ||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||
| |||||||||
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
OEM SerComm, probable model IP806SM
"4900MZ30" is silkscreened on the board. There is no FCC ID printed on the label. The FCC ID of the probable OEM model has been assigned to it.
While booting, the device may temporarily take on the SSID of Marvell-AP32.
Links of Interest
On SpeedGuide.net
Hotbrick Soho 401W Router – Review on jeremyj.com
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2019) |
Reverting
This section is empty. You can help by adding to it. (December 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2019) |
USB Info
This section is empty. You can help by adding to it. (December 2019) |
vlan Info
This section is empty. You can help by adding to it. (December 2019) |
Pictures
- external
- internal
Notes
This section is empty. You can help by adding to it. (December 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2019) |
See also
This section is empty. You can help by adding to it. (December 2019) |