Handlink AP-100
From TechInfoDepot
Jump to navigationJump to search
bgn | |||||
|---|---|---|---|---|---|
| AP-100 Smart Wi-Fi Access Point | |||||
| Homepage | |||||
| Platform | |||||
| Brand • Model • Rev |
Handlink AP-100 | ||||
| FCC ID | |||||
| Type |
access point, CPE | ||||
| Wireless class |
N300 | ||||
| CPU1 | |||||
| Flash1 Chip |
Macronix MX25L6406EMI-12G | ||||
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip |
EtronTech EM68A16CWQB-25H | ||||
| ETH chip1 | |||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| PoE |
non-standard (otherwise unspecified) | ||||
| Power |
18 VDC, 0.66 A | ||||
| Connector type |
Ethernet (PoE) | ||||
| Flags |
hg directional | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
10.59.100.1 | ||||
| Default login user |
admin | ||||
| Default login password |
admin | ||||
| Default SSID |
Superwifi Network X | ||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 17 October 2013 | ||||
| Country of manuf | Taiwan | ||||
| Radio 1 | |||||
| Chip1 | |||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Overview
"M01-"????"-X01" appears to be silkscreened on the board in the FCC photos.
CPU: Atheros AR9344-BC2A
RAM: EtronTech EM68A16CWQB-25H / Winbond W9725G6JB-25
This device is using two Skyworks ( / SiGe) SE2576L / 2576L 2.4GHz Power Amplifier modules.
The hardware of this device would appear to be the same (or very similar to) that of the Altai C1n Super WiFi CPE/AP.
Default settings are per the FCC manual.
- The default SSID format is stated to be Superwifi Network + a space + a number between 0 and 7.
- A 00:19:BE (Altai) OUI is shown as being used within the manual..
Links of Interest
This section is empty. You can help by adding to it. (December 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2021) |
Reverting
This section is empty. You can help by adding to it. (December 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2021) |
USB Info
This section is empty. You can help by adding to it. (December 2021) |
vlan Info
This section is empty. You can help by adding to it. (December 2021) |
Pictures
This section is empty. You can help by adding to it. (December 2021) |
Notes
This section is empty. You can help by adding to it. (December 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2021) |
See also
This section is empty. You can help by adding to it. (December 2021) |
Categories:
- Handlink
- Embedded system/access point
- Embedded system/CPE
- Embedded System Atheros
- Embedded System AR9344
- Manuf AboCom
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Atheros
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation