Hame 3G Wi-Fi Router (MPR-A1)
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| wireless router | |
| Platform | |
| Brand • Model • Rev |
Hame MPR-A1 |
| FCC ID | |
| Type |
wireless router |
| Wireless class |
N150 |
| CPU1 |
Ralink RT5350 |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
EtronTech EM63A165TS-6G |
| ETH chip1 |
Ralink RT5350 |
| Ethernet Port Count |
1-100MbE-LAN |
| Expansion IF types |
none specified |
| Power |
5 VDC, 1.2 A |
| Connector type |
USB Female Mini-B |
| Flags |
3G capable, battery, portable |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.169.1 |
| Default login user |
Leave blank |
| Default login password |
hame |
| Default SSID |
HAME_A1_XXXX |
| Retail | |
| FCC approval date | 06 March 2013 |
| ASIN |
B008XD4BL0 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Ralink RT5350 |
| Wireless interface OUI |
9C:41:7C |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
"MS-ME198407", "A1-V2.0+", and "A1-V2.1" is silkscreened on the multiple board types in the FCC photos.
The FCC test report states that this FCC ID applies to the A1, A1+, A1B, A1S, A1W, A2, A2B, A2S, and A2W.
Default settings are per the FCC manual.
- The default SSID for the device is shown to be HAME_A1_XXXX. There are a fair number of entries for this SSID in WiGLE (generally / exclusively with 9C:41:7C OUIs).
- The FCC manual also includes a list of compatibility tested 3G dongles.
Links of Interest
This section is empty. You can help by adding to it. (December 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2021) |
Reverting
This section is empty. You can help by adding to it. (December 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2021) |
USB Info
This section is empty. You can help by adding to it. (December 2021) |
vlan Info
This section is empty. You can help by adding to it. (December 2021) |
Pictures
This section is empty. You can help by adding to it. (December 2021) |
Notes
This section is empty. You can help by adding to it. (December 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2021) |
See also
This section is empty. You can help by adding to it. (December 2021) |