HP t5325
From TechInfoDepot
Revision as of 02:57, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| HP Thin Client | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
HP t5325 |
| Type |
thin client |
| CPU1 |
Marvell 88F6281 |
| CPU1 Speed |
1.2 GHz |
| Flash1 Chip |
Samsung K9F2G08U0B-PCB0 x 2 |
| Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| Flash2 Chip |
SST 25VF0808 |
| Flash2 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> |
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Type |
DDR2 |
| RAM1 Chip |
Micron 9TG27D9JMB x 4 |
| RAM2 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM2 Chip |
Samsung K4T51163QG |
| ETH chip1 |
Marvell 88F6281 |
| ETH chip2 |
Marvell 88E3016 |
| Ethernet Port Count |
1-100MbE-LAN |
|
Ethernet OUI: F4:CE:46 | |
| Stock bootloader |
U-Boot 1.1.4 MIC v3.4.19-16 |
| Stock FW OS |
Linux 2.6.22 18-2-armel |
| Expansion IF types |
USB 2.0 |
| USB ports |
4 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 3 A |
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) |
| Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), COMA |
| Flags |
DVI, Audio In/Out (3.5mm), RTC w/ battery backup |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
acquired via DHCP |
| Default login user |
root |
| Default login password |
Leave blank |
| 3rd Party Firmware Support |
Debian, (5.0.8) |
| Retail | |
| (Est.) release date | 09 December 2009 |
| ASIN |
B0030CFC3K |
| Country of manuf | China |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
2x Samsung Flash attached via Silicon Motion SM2240T SSD Controller.
- Graphics provided by XGI Volari Z11 GPU which uses RAM2.
- CPU: Marvell 88F6281 @1.2GHz
- GPU: XGI VOLARI-Z11-A2CB-HF (64MB)
- Flash: 512MB, RAM: 512MB (DDR2)
- Board is tracked for a SATA interface.
- Runs a custom version of Debian Lenny.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2021) |
Reverting
This section is empty. You can help by adding to it. (December 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2021) |
USB Info
This section is empty. You can help by adding to it. (December 2021) |
vlan Info
This section is empty. You can help by adding to it. (December 2021) |
Pictures
This section is empty. You can help by adding to it. (December 2021) |
Notes
This section is empty. You can help by adding to it. (December 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2021) |
See also
This section is empty. You can help by adding to it. (December 2021) |