Gemtek WL-299C
From TechInfoDepot
Revision as of 16:54, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| 11Mbps Smart Wireless Ethernet Adapter | |
| Platform | |
| Brand • Model • Rev |
Gemtek WL-299C |
| FCC ID | |
| IC ID | |
| Type |
bridge, access point |
| Wireless class |
B11 |
| CPU1 |
Ubicom IP2022 |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Ubicom IP2022 |
| Ethernet Port Count |
1-10MbE-LAN |
| Expansion IF types |
CompactFlash |
| Compact Flash Slots |
1 |
| Power |
5 VDC, 2 A |
| Connector type |
barrel |
| Flags |
schematics |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 19 December 2002 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Radio1 module | |
| Radio1 module IF |
CompactFlash |
| Chip1 |
Intersil ISL3871 |
| Chip2 |
Intersil ISL3684 |
| Wireless interface OUI |
00:90:4B |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
Overview
The FCC label notes the device as a 11Mbps Smart Wireless Ethernet Adapter.
- SparkLAN WL-299C manual
- Default IP: 192.168.5.99
- Default credentials: blank:blank
This device was sold by EthoStream as a 11Mbps Wireless LAN AP Client.
- 00:90:4B OUI (Gemtek)
"109-600-8400" and "WL678F_V01" is silkscreened on the wireless module in the FCC photos.
"109-700-9900" and "WL299C_V01" is silkscreened on the main board in the FCC photos.
Links of Interest
This section is empty. You can help by adding to it. (May 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2022) |
Reverting
This section is empty. You can help by adding to it. (May 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2022) |
USB Info
This section is empty. You can help by adding to it. (May 2022) |
vlan Info
This section is empty. You can help by adding to it. (May 2022) |
Pictures
This section is empty. You can help by adding to it. (May 2022) |
Notes
This section is empty. You can help by adding to it. (May 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2022) |
See also
This section is empty. You can help by adding to it. (May 2022) |
Categories:
- Gemtek
- Embedded system/bridge
- Embedded system/access point
- Embedded System Ubicom
- Embedded System IP2022
- Manuf Gemtek
- Embedded System Intersil
- Embedded System ISL3871
- Embedded System ISL3684
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Ubicom
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation