GL.iNet GL-AR300M
bgn (N300) | |
|---|---|
| Mini Smart Router | |
|
| |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
GL.iNet GL-AR300M EXT (MD/Lite) |
| FCC ID | |
| Type |
travel router |
| CPU1 |
Qualcomm Atheros QCA9531 |
| CPU1 Speed |
650 MHz |
| Flash1 Chip |
Winbond W25Q128FVSG |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| Flash2 Chip |
GigaDevice GD5F1GQ4UCYIG |
| Flash2 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
Etron EM68C16CWQE-W5H |
| ETH chip1 |
Qualcomm Atheros QCA9531 |
| Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Stock FW OS |
Linux 3.18.20 OpenWrt 15.05 |
| Expansion IF types |
USB 2.0, Mini PCIe (non-standard connector) |
| Mini PCIe slots |
1 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 1 A |
| Connector type |
USB Female Micro-B |
| Serial Port (UART) |
yes, 4-pad header |
| Other | |
|
Default SSID: GL-AR300M-XXX | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 14 September 2016 |
| (Est.) release date | 2017 |
| ASINs |
B01I92T754 B01K6MHRJI |
| Radio 1 | |
| Chip1 |
Qualcomm Atheros QCA9531 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL, RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented GL.iNet device with specifications, see GL.iNet.
Overview
Features
"GL-AR300M-V1.2.0" is silkscreened on the board in the FCC photos.
Specifications
- Interfaces: 1x WAN, 1x LAN, 1x USB2.0, PCIe, UART
- Frequency: 2.4GHz 2T2R (+ 5GHz PCIe Card addon)
- Transmission rate: 300Mbps, Max Tx Power: 20dBm
- Power consumption: <3W (1x micro USB, no PoE)
- Dimensions: 58x58x25 mm, Weight: 39g
Description
The GL-AR300M is the newest in the line of GL.iNet products as of early 2017.
- It is available with internal or external antennas (GL-AR300M-EXT).
It is a compact, squared shaped travel router that runs OpenWrt perfectly.
GL.iNet ships the device with their own version of OpenWrt, but they also offer multiple clean OpenWrt images pre-built for their devices at FW. The AR300M is identical in hardware to the GL.iNet AR300MD, aside from the fact that it does not ship with the 5GHz module installed. Unlike other GL.iNet routers, this model has no PoE support (due to the 5GHz module taking up all the extra space). Power is provided by a Micro USB 5V 1A input.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2021) |
Reverting
This section is empty. You can help by adding to it. (November 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2021) |
USB Info
This section is empty. You can help by adding to it. (November 2021) |
vlan Info
This section is empty. You can help by adding to it. (November 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (November 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2021) |
See also
This section is empty. You can help by adding to it. (November 2021) |