Excito B3
From TechInfoDepot
Revision as of 02:46, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| Excito B3 "Bubba" Server | |||||||||||||
|
| |||||||||||||
| Homepage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WikiDevi.wi-cat.ru | |||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt |
Status Unknown | ||||||||||||
| OpenWrt |
Status Unknown | ||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Excito B3 RF1 | ||||||||||||
| Type |
NAS | ||||||||||||
| CPU1 |
Marvell 88F6281 | ||||||||||||
| CPU1 Type |
ARM v5 | ||||||||||||
| CPU1 Speed |
1.2 GHz | ||||||||||||
| Flash1 Type |
SPI | ||||||||||||
| Flash1 Chip |
STMicro M25P16VP | ||||||||||||
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||||||||||
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> | ||||||||||||
| RAM1 Chip |
Samsung K4T1G084QF-BCF7 x 4 | ||||||||||||
| ETH chip1 |
Marvell 88F6281 | ||||||||||||
| ETH chip2 |
Marvell 88E1116R | ||||||||||||
| ETH chip3 |
Marvell 88E1116R | ||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 1-1GbE-LAN | ||||||||||||
| Stock bootloader |
U-Boot 2010.06 | ||||||||||||
| Stock FW OS |
Linux 2.6.39.4-11 Debian 6.0.3 | ||||||||||||
| Expansion IF types |
SATA, eSATA, Mini PCIe, USB 2.0 | ||||||||||||
| Mini PCIe slots |
1 | ||||||||||||
| USB ports |
2 | ||||||||||||
| SATA Ports |
2 | ||||||||||||
| eSATA Ports |
1 | ||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||
| Power |
12 VDC, 3 A | ||||||||||||
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) | ||||||||||||
| Serial Port (UART) |
yes, 6-pin header, unpopulated, 3.3V TTL, (115200 8N1) | ||||||||||||
| JTAG Port |
yes | ||||||||||||
| Flags |
RTC w/ battery backup, eSATA, buzzer, metal case | ||||||||||||
|
Additional chips | |||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
acquired via DHCP | ||||||||||||
| Default login user |
root | ||||||||||||
| Default login password |
excito | ||||||||||||
| 3rd Party Firmware Support | |||||||||||||
| Retail | |||||||||||||
| (Est.) release date | October 2010 | ||||||||||||
| (Est.) initial retail price (in USD): |
$400 | ||||||||||||
| ASIN |
B004FV9T2A multiple uses | ||||||||||||
| Country of manuf | Sweden | ||||||||||||
| |||||||||||||
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
Specifications
- CPU: Marvell 88F6281 ARM v5 @1.2GHz
- Storage: 2MB SPI flash, SATA and eSATA
- RAM: 512MB DRAM
- Network: 2x Gigabit Ethernet
- USB: 2x USB 2.0
- Power Source: DC Jack 12V
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (September 2021) |
Reverting
This section is empty. You can help by adding to it. (September 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (September 2021) |
USB Info
This section is empty. You can help by adding to it. (September 2021) |
vlan Info
This section is empty. You can help by adding to it. (September 2021) |
Pictures
This section is empty. You can help by adding to it. (September 2021) |
Notes
This section is empty. You can help by adding to it. (September 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (September 2021) |
See also
This section is empty. You can help by adding to it. (September 2021) |