Embest Technology RIoTboard (i.MX6 Solo)
From TechInfoDepot
Revision as of 02:42, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| RIoTboard i.MX6 Solo | |
| WikiDevi.wi-cat.ru | |
|---|---|
| Platform | |
| Brand • Model • Rev |
Embest Technology RIoTboard (i.MX6 Solo) |
| Type |
single-board computer, development board |
| CPU1 |
Freescale (NXP) i.MX6S |
| CPU1 Speed |
1 GHz |
| Flash1 Chip |
Micron Model? |
| Flash1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
| RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Chip |
Micron MT41K256M16 x 2 |
| ETH chip1 |
Freescale (NXP) i.MX6S |
| ETH chip2 |
Atheros AR8035-A |
| Ethernet Port Count |
1-LAN |
|
| |
| Stock bootloader |
U-Boot 2009.08-dirty |
| Stock FW OS |
Linux 3.10.17 Android 4.4.2 |
| Expansion IF types |
USB 2.0, Micro SD Card slot |
| USB ports |
5 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 4 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3-pin header, 3.3V TTL, (115200 8N1), J18 |
| JTAG Port |
yes, 10-pin header, J10 |
| Flags |
Audio in/out (3.5 mm), HDMI out, LVDS, MIPI, UART, SPI, GPIO, RTC |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Manuf/OEM/ODM | |
| Retail | |
| (Est.) release date | January 2014 |
| (Est.) initial retail price (in USD): |
$74 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
Overview
This section is empty. You can help by adding to it. (August 2021) |
Links of Interest
Wikis
Reviews
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (August 2021) |
Reverting
This section is empty. You can help by adding to it. (August 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (August 2021) |
USB Info
This section is empty. You can help by adding to it. (August 2021) |
vlan Info
This section is empty. You can help by adding to it. (August 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (August 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (August 2021) |
See also
This section is empty. You can help by adding to it. (August 2021) |
Categories:
- Embest Technology
- Embedded system/single-board computer
- Embedded system/development board
- Embedded System Freescale (NXP)
- Embedded System i.MX6S
- Embedded System Atheros
- Embedded System AR8035-A
- Manuf Embest Technology
- Wired Embedded System
- Freescale (NXP)
- Atheros
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation