Edimax EW-7416APn
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| Wireless 802.11n Range Extender / Access Point | |
|
| |
| Homepage | |
| Platform | |
| Brand • Model • Rev |
Edimax EW-7416APn |
| FCC ID | |
| Type |
access point |
| Wireless class |
N300 |
| CPU1 |
Ralink RT2880 |
| CPU1 Speed |
266 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
Brand? Model? x 2 |
| ETH chip1 |
Ralink RT2880 |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.2.1 |
| Default login user |
admin |
| Default login password |
1234 |
| Manuf/OEM/ODM | |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 |
Ralink RT2880 |
| Chip2 |
Ralink RT2820 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
The third receive chain has been omitted.
If there are multiple revisions of the device, I don't know what the differences between revisions are (if any). The RAM and flash amount are assumed to be 4 and 16MB as specified in that post.
"1244-00000548-01Z" may be silkscreened on the board.
The FCC test report lists the following as identical models..
- Edimax EW-7416-APn / GAP-416n
- Hawking HWABN1 / HWREN1
- Sitecom WL-330
Links of Interest
This section is empty. You can help by adding to it. (May 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2022) |
Reverting
This section is empty. You can help by adding to it. (May 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2022) |
USB Info
This section is empty. You can help by adding to it. (May 2022) |
vlan Info
This section is empty. You can help by adding to it. (May 2022) |
Pictures
This section is empty. You can help by adding to it. (May 2022) |
Notes
This section is empty. You can help by adding to it. (May 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2022) |
See also
This section is empty. You can help by adding to it. (May 2022) |
Categories:
- Edimax
- Embedded system/access point
- Embedded System Ralink
- Embedded System RT2880
- Manuf Edimax
- Embedded System RT2820
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Ralink
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation