Edimax BR-6435nD
From TechInfoDepot
Jump to navigationJump to searchabgn | |
|---|---|
| wireless router | |
| Platform | |
| Brand • Model • Rev |
Edimax BR-6435nD |
| FCC ID | |
| Type |
wireless router |
| Wireless class |
AN600 |
| CPU1 | |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9825G6JH-6 |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-WAN 4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.2.1 |
| Default login user |
admin |
| Default login password |
1234 |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 27 September 2012 |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL, RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Ralink RT5572 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL, RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
The FCC test report lists the following models as covered by this FCC ID..
- BR-6435ND
- GR-435ND
- BR-6435nD
- BR-6435nD V2
Both radios are assumed to be connected to the internal U.FL connectors (and thus, also the external RP-SMA connectors). Some models probably have integral antennas.
"1244-01000818-50Z" is silkscreened on the board in the FCC internal photos.
Links of Interest
This section is empty. You can help by adding to it. (May 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2022) |
Reverting
This section is empty. You can help by adding to it. (May 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2022) |
USB Info
This section is empty. You can help by adding to it. (May 2022) |
vlan Info
This section is empty. You can help by adding to it. (May 2022) |
Pictures
This section is empty. You can help by adding to it. (May 2022) |
Notes
This section is empty. You can help by adding to it. (May 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2022) |
See also
This section is empty. You can help by adding to it. (May 2022) |
Categories:
- Edimax
- Embedded system/wireless router
- Embedded System Ralink
- Embedded System RT3352
- Manuf Edimax
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System RT5572
- Embedded System IEEE 802.11a/n
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- Ralink
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation