Edimax BR-6228ENS
From TechInfoDepot
Jump to navigationJump to searchbgn | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| wireless router | |||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev |
Edimax BR-6228EnS | ||||||||||||||||
| FCC ID | |||||||||||||||||
| Type |
wireless router | ||||||||||||||||
| Wireless class |
N150 | ||||||||||||||||
| CPU1 |
Realtek RTL8196E | ||||||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||||||
| Flash1 Size |
? MiB | ||||||||||||||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
| RAM1 Chip |
Nanya NT5SV8M16HS-6K | ||||||||||||||||
| ETH chip1 |
Realtek RTL8196E | ||||||||||||||||
| Switch |
Realtek RTL8196E | ||||||||||||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Expansion IF types |
none specified | ||||||||||||||||
| Power |
5 VDC, 1 A | ||||||||||||||||
| Connector type |
barrel | ||||||||||||||||
| Categorized as |
not categorized | ||||||||||||||||
| Other | |||||||||||||||||
| Default IP address |
192.168.2.1 | ||||||||||||||||
| Default login user |
admin | ||||||||||||||||
| Default login password |
1234 | ||||||||||||||||
| Manuf/OEM/ODM | |||||||||||||||||
| Retail | |||||||||||||||||
| FCC approval date | 25 September 2013 | ||||||||||||||||
| Country of manuf | China | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 |
Realtek RTL8188ER | ||||||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||||||
| Antenna Connector Type |
RP-SMA | ||||||||||||||||
| MIMO status |
1x1:1 | ||||||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n |
up to 150 Mbps | ||||||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"1242-01000341-50Z" is silkscreened on the board in the FCC photos.
- Addl. PCB manuf. marks w/ "MADE IN CHINA" and a date code of 1310 are clustered on another part of the board.
The FCC test report notes covered models as...
- BR-6228ENS
- GR-228ENS
- BR-6228nS V2
- BR-6228nC V2
.. and some models are likely without RP-SMA connectors. E models are presumed to use external antennae.
The power adapter shown in the FCC external photos is a DVE DSA-6PFE-05 FUS 050100 (100-240VAC ~ 50/60 Hz, 0.2A -> 5VDC, 1A).
Links of Interest
This section is empty. You can help by adding to it. (December 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2021) |
Reverting
This section is empty. You can help by adding to it. (December 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2021) |
USB Info
This section is empty. You can help by adding to it. (December 2021) |
vlan Info
This section is empty. You can help by adding to it. (December 2021) |
Pictures
This section is empty. You can help by adding to it. (December 2021) |
Notes
This section is empty. You can help by adding to it. (December 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2021) |
See also
This section is empty. You can help by adding to it. (December 2021) |
Categories:
- Edimax
- Embedded system/wireless router
- Embedded System Realtek
- Embedded System RTL8196E
- Manuf Edimax
- Embedded System RTL8188ER
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation