Edimax AirBox AI-1001W V2
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| AirBox : Smart Air Quality Detector with PM2.5, Temperature and Humidity Sensors | |
|
| |
| Homepage | |
| Platform | |
| Brand • Model • Rev |
Edimax AI-1001W V2 |
| FCC ID | |
| Type |
sensor, IoT |
| Wireless class |
N150 |
| CPU1 |
Realtek RTL8195AM |
| CPU1 Speed |
166 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
2.5 MiB2,621,440 B <br />20,480 Kib <br />2,560 KiB <br />20 Mib <br />0.00244 GiB <br /> |
| RAM1 Chip |
Realtek RTL8195AM |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 1 A |
| Connector type |
USB Female Micro-B |
| Flags |
PM2.5 sensor, temperature sensor, humidity sensor |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Default login user |
admin |
| Default login password |
1234 |
| Default SSID |
PM2.5_Serup_XX |
| Retail | |
| FCC approval date | 02 August 2018 |
| Country of manuf | China |
| Radio 1 | |
| Radio1 module |
unknown |
| Radio1 module IF |
on-board SiP |
| Chip1 |
Realtek RTL8195AM |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"BP 4M E186014" and "1244-00001409-50Z_ES" are silkscreened on the wireless module and "BP 4M E186014" and "1244-00001410-50Z_ES" are silkscreened on the main board in the FCC photos. The "BP" IDs suggest that these boards were made by Brain Power
The Realtek Ameba chip ID is not shown in the internal photos so the RTL8195AM is just a guess, for now.
Additional model names are covered by this FCC entry: AI-1001W, AI-1001W V3, AI-1001W V4, AI-1002W, AI-1003W
Links of Interest
News
- "Featuring advanced Realtek Ameba chipsets"
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2022) |
Reverting
This section is empty. You can help by adding to it. (May 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2022) |
USB Info
This section is empty. You can help by adding to it. (May 2022) |
vlan Info
This section is empty. You can help by adding to it. (May 2022) |
Pictures
This section is empty. You can help by adding to it. (May 2022) |
Notes
This section is empty. You can help by adding to it. (May 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2022) |
See also
This section is empty. You can help by adding to it. (May 2022) |
Categories:
- Edimax
- Embedded system/sensor
- Embedded system/IoT
- Embedded System Realtek
- Embedded System RTL8195AM
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation