EDUP WAR-54M-01
From TechInfoDepot
Jump to navigationJump to search
bg | |||||
|---|---|---|---|---|---|
| 54Mbps Wireless Gateway and Access Point | |||||
|
| |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
EDUP WAR-54M-01 | ||||
| FCC ID | |||||
| Type |
wireless router, dsl modem | ||||
| Wireless class |
G54 | ||||
| CPU1 |
Texas Instruments TNETD7300A | ||||
| Flash1 Chip |
Macronix MX29LV320ABTC-90 | ||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Chip |
SK hynix HY57V281620ETP-H | ||||
| ETH chip1 |
Texas Instruments TNETD7300A | ||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
| Expansion IF types |
none specified | ||||
| Power |
? VDC, ? A | ||||
| Connector type |
barrel | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
192.168.0.1 | ||||
| Default login user |
admin | ||||
| Default login password |
admin | ||||
| Default SSID |
WIRELESS | ||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 31 December 2003 | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 |
Texas Instruments TNETW1130 | ||||
| Chip2 |
Texas Instruments Model? | ||||
| Wireless interface OUI |
00:15:05 | ||||
| Antenna Connector Type |
RP-SMA | ||||
| Wireless Standard |
IEEE 802.11b/g | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
The device is EDUP branded (there is EDUP molded onto the bottom of the casing top, there was a EDUP sticker attached to the WMAC/BB). The EP-DL520G is probably also this same device.
"Actiontec 05292A+" is silkscreened on the board. The device is a Actiontec GT701WG (Qwest branded) The web configuration interface identifies the device as a DL510G.
There is no FCC ID printed on the label, but the FCC ID of the parent product has been assigned to it.
The default credentials here may be limited to Qwest firmware.
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
- external
- internal
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- EDUP
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Texas Instruments
- Embedded System TNETD7300A
- Manuf Actiontec
- Embedded System TNETW1130
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Texas Instruments
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation