EDUPLINK EPLINK-9001
From TechInfoDepot
Revision as of 01:11, 9 December 2020 by ShadowBot (talk | contribs) (→top: clean up, replaced: |lan_speed = 10/100 → |lan_speed = 100MbE, |wan_speed = 10/100 → |wan_speed = 100MbE, |wan_speed = 100M → |wan_speed = 100MbE, |lan_speed = 100M → |lan_speed = 100MbE, |lan_speed = 100MbEbE → |lan_speed = 100MbE, |wan_speed = 100MbEbE → |wan_speed = 100MbE)
| wireless router | |
| Platform | |
|---|---|
| Brand • Model • Rev |
EDUPLINK EPLINK-9001 |
| Model Part Number |
2AMG8WT-RT8501 |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 | |
| CPU1 Speed |
580 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Other | |
|
Default SSID: WIFI-XXXX (4 addl. devices) | |
| Retail | |
| FCC approval date | 11 September 2017 |
| ASIN |
B06Y1W3TTK multiple uses |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
MediaTek MT7612E |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 867 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
According to the Differences Description document on the FCC, the following models are identical:
- WT-RT8501
- EP-2655
- EPLINK-RT9001
- KW-RT6019
"800002186 V1.0" is silkscreened on the board in the FCC photos.
Links of Interest
This section is empty. You can help by adding to it. (February 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2020) |
Reverting
This section is empty. You can help by adding to it. (February 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2020) |
USB Info
This section is empty. You can help by adding to it. (February 2020) |
vlan Info
This section is empty. You can help by adding to it. (February 2020) |
Pictures
This section is empty. You can help by adding to it. (February 2020) |
Notes
This section is empty. You can help by adding to it. (February 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2020) |
See also
This section is empty. You can help by adding to it. (February 2020) |
Categories:
- EDUPLINK
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7620A
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7612E
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wired Embedded System
- MediaTek
- Embedded System
- Articles to be expanded from February 2020
- Articles with empty sections from February 2020
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation