D-Link DWR-116 rev A1
From TechInfoDepot
Jump to navigationJump to search
bgn | |
|---|---|
| Wireless N300 Multi-WAN Router | |
|
| |
| Homepage | |
| Support | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
D-Link DWR-116 A1 |
| FCC ID | |
| Board ID |
11340Y20NP00302B1 |
| Type |
wireless router |
| Wireless class |
N300 |
| CPU1 | |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
580 MHz |
| Flash1 Chip |
Macronix MX25L6406E |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9425G6JH-5 |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Stock bootloader |
JBoot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 2 A |
| Connector type |
barrel |
| Flags |
3G/4G modem supports |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | common |
| FCC approval date | 21 June 2013 |
| ASINs |
B00G5DJUP2 B00N0W4FTM |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
- "11340Y20NP00302B1" and "2012/11/22" is silkscreened on the board in the FCC photos (OEM: AMIT).
See also: AMIT CDE530AM-002
Links of Interest
This section is empty. You can help by adding to it. (August 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This section is empty. You can help by adding to it. (August 2020) |
Upgrading
This section is empty. You can help by adding to it. (August 2020) |
Reverting
This section is empty. You can help by adding to it. (August 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (August 2020) |
USB Info
This section is empty. You can help by adding to it. (August 2020) |
vlan Info
This section is empty. You can help by adding to it. (August 2020) |
Pictures
This section is empty. You can help by adding to it. (August 2020) |
Notes
This section is empty. You can help by adding to it. (August 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (August 2020) |
See also
This section is empty. You can help by adding to it. (August 2020) |
Categories:
- D-Link
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7620N
- Embedded System MIPS
- Manuf AMIT
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- MediaTek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation