D-Link DWL-G710 rev A1
From TechInfoDepot
Jump to navigationJump to search
bg | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 802.11g Wireless Range Extender | |||||||||||||
|
| |||||||||||||
| Support | |||||||||||||
| Wikipedia | |||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
D-Link DWL-G710 A1 | ||||||||||||
| FCC ID | |||||||||||||
| Type |
repeater | ||||||||||||
| Wireless class |
G54 | ||||||||||||
| CPU1 |
Marvell Model? | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
? MiB | ||||||||||||
| RAM1 Chip |
Brand? Model? | ||||||||||||
| ETH chip1 |
Marvell Model? | ||||||||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
5 VDC, 2 A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.0.30 | ||||||||||||
| Default login user |
admin | ||||||||||||
| Default login password |
Leave blank | ||||||||||||
| Manuf/OEM/ODM |
Global Sun WL AP 2454 NM0 | ||||||||||||
| Retail | |||||||||||||
| FCC approval date | 06 January 2005 | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Marvell Model? | ||||||||||||
| Chip2 |
Marvell 88W8000 | ||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||
| Antenna Connector Type |
RP-SMA | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
"WL AP 2454 NM0 B10 V1.0" and "WL AP 2454 NM0 V1.0" is silkscreened on the board in the FCC photos.
The default SSID may be default.
Links of Interest
This section is empty. You can help by adding to it. (September 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (September 2020) |
Reverting
This section is empty. You can help by adding to it. (September 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (September 2020) |
USB Info
This section is empty. You can help by adding to it. (September 2020) |
vlan Info
This section is empty. You can help by adding to it. (September 2020) |
Pictures
This section is empty. You can help by adding to it. (September 2020) |
Notes
This section is empty. You can help by adding to it. (September 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (September 2020) |
See also
This section is empty. You can help by adding to it. (September 2020) |