D-Link DNS-313
From TechInfoDepot
Revision as of 02:19, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| DNS-313 1-Bay Network Storage enclosure | |
|
| |
| Support | |
|---|---|
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
D-Link DNS-313 |
| Type |
NAS, NAS enclosure |
| CPU1 |
Cortina Systems CS3512 |
| CPU1 Speed |
300 MHz |
| Flash1 Chip |
cFeon EN29LV400AB-70TCP |
| Flash1 Size |
0.512 MiB536,870.912 B <br />4,194.304 Kib <br />524.288 KiB <br />4.096 Mib <br />5.0e-4 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Nanya NT5DS32M16BS-6K |
| ETH chip1 |
Cortina Systems CS3512 |
| ETH chip2 |
Realtek RTL8211B |
| Ethernet Port Count |
1-1GbE-LAN |
|
| |
| Stock bootloader |
RedBoot |
| Stock FW OS |
Linux 2.6.3 |
| Expansion IF types |
USB 2.0 (slave), SATA |
| USB ports |
1 |
| SATA Ports |
1 |
| USB Hub Compatible |
no |
| Power |
12 VDC, 3 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 4-pin header, unpopulated, 3.3V TTL, (19200,8,N,1), CON2 |
| Flags |
RTC w/ battery backup |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.0.32 |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| (Est.) release date | October 2007 |
For a list of all currently documented Cortina SoC's with specifications, see Cortina.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
USB 2.0 Type B port is used exclusively for Direct Attached Storage function.
Links of Interest
This section is empty. You can help by adding to it. (September 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (September 2020) |
Reverting
This section is empty. You can help by adding to it. (September 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (September 2020) |
USB Info
This section is empty. You can help by adding to it. (September 2020) |
vlan Info
This section is empty. You can help by adding to it. (September 2020) |
Pictures
This section is empty. You can help by adding to it. (September 2020) |
Notes
This section is empty. You can help by adding to it. (September 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (September 2020) |
See also
This section is empty. You can help by adding to it. (September 2020) |
Categories:
- D-Link
- Embedded system/NAS
- Embedded system/NAS enclosure
- Embedded System Cortina Systems
- Embedded System CS3512
- Embedded System Realtek
- Embedded System RTL8211B
- OpenWrt Supported
- Wired Embedded System
- Cortina Systems
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation