D-Link DNS-120 rev A2
From TechInfoDepot
Revision as of 02:19, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| Network Storage Adapter | |
|
| |
| Support | |
|---|---|
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
D-Link DNS-120 A2 |
| Type |
NAS |
| CPU1 |
ADMtek ADM5120 |
| Flash1 Chip |
Spansion S29GL032M90TAIR4 |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
ESMT M12L128168A-7T x 2 |
| ETH chip1 |
ADMtek ADM5120 |
| Ethernet Port Count |
1-100MbE-LAN |
| Stock bootloader |
ADMBoot |
| Stock FW OS |
Linux 2.4.18 5120-05 |
| Expansion IF types |
USB 2.0 |
| USB ports |
2.0 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 2.5 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 4-pin header, internal, unpopulated, 3.3V TTL, (115200 8N1) |
| JTAG Port |
yes, 14-pin header, unpopulated |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.0.101 |
| Default login user |
admin |
| Default login password |
Leave blank |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | common |
| (Est.) release date | April 2005 |
| UPC |
790069270666 (UPC DB, On eBay) |
| ASIN |
B0002Z45J0 |
| Country of manuf | Taiwan |
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
Overview
"EPFS202UA020" and "FS202WU-1B0" is silkscreened on the board.
- A date code of 0517 (April 2005) is also on the board.
This device would seem to be a Cellvision FS-202U
- (the FS-202WU [wireless capable] probably shared the same board).
This device is listed on the linux-mips ADM5120 device list.
In the absense of a DHCP server, the device will assume the IP of 192.168.0.101.
Links of Interest
This section is empty. You can help by adding to it. (September 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (September 2020) |
Reverting
This section is empty. You can help by adding to it. (September 2020) |
JTAG-Serial Info
JTAG
This section is empty. You can help by adding to it. (September 2020) |
Serial
Serial Pinouts
° ° ° ° (3.3) (TxD) (RxD) (GND) JP2 <--- LED ---> Screw + Board RSide edge
Recovery via ADM Boot
Hit the spacebar three times quickly after power-on - you can then transfer
- a desired file to flash via XMODEM (Tera Term will work fine if you're
- in [or have] a Windows environment to work with). [1] [2] [3]
A successful recovery should look something like the following..
ADM Bootloader (v0.04.01 20040216) ================================== (a) Download vmlinuz to flash ... (b) Download vmlinuz to sdram (for debug) ... (c) Update bootloader ... (e) Exit Please enter your key : a Downloading..........PASS Eraseing flash.......PASS Programming flash....PASS
Serial Recovery
This section is empty. You can help by adding to it. (September 2020) |
USB Info
This section is empty. You can help by adding to it. (September 2020) |
vlan Info
This section is empty. You can help by adding to it. (September 2020) |
Pictures
Notes
This section is empty. You can help by adding to it. (September 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (September 2020) |
See also
This section is empty. You can help by adding to it. (September 2020) |