D-Link DIR-810L rev B1
From TechInfoDepot
Jump to navigationJump to searchabgn+ac | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wireless AC750 Dual Band Cloud Router | |||||||||||||
|
| |||||||||||||
| Wikipedia | |||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
D-Link DIR-810L B1 | ||||||||||||
| FCC ID | |||||||||||||
| IC ID | |||||||||||||
| Type |
wireless router | ||||||||||||
| Wireless class |
AC750 | ||||||||||||
| CPU1 | |||||||||||||
| CPU1 Speed |
580 MHz | ||||||||||||
| Flash1 Chip |
Macronix MX25L6406EM2I-12G | ||||||||||||
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
| RAM1 Chip |
ESMT M14D5121632A-2.5B | ||||||||||||
| ETH chip1 | |||||||||||||
| Switch | |||||||||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
12 VDC, 1 A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Serial Port (UART) |
yes, 4-pad header, J1, (57600 8N1) | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.0.1 | ||||||||||||
| Default login user |
Admin | ||||||||||||
| Default login password |
Leave blank | ||||||||||||
| Default SSID |
dlink-XXXX, dlink-XXXX-5GHz | ||||||||||||
| Manuf/OEM/ODM | |||||||||||||
| Retail | |||||||||||||
| Availability | End of Life | ||||||||||||
| FCC approval date | 05 March 2013 | ||||||||||||
| (Est.) release date | 11 April 2013 | ||||||||||||
| UPC |
790069390296 (UPC DB, On eBay) | ||||||||||||
| ASIN |
B00C9V0OBI multiple uses | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | |||||||||||||
| Wireless interface OUI |
6C:19:8F | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
2x2:2 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| Radio 2 | |||||||||||||
| Chip1 |
MediaTek MT7610E | ||||||||||||
| Wireless interface OUI |
6C:19:8F | ||||||||||||
| Antenna Connector Type |
U.FL | ||||||||||||
| MIMO status |
1x1:1 | ||||||||||||
| Wireless Standard |
IEEE 802.11a/n/ac | ||||||||||||
| 802.11ac |
up to 433 Mbps | ||||||||||||
| 802.11n |
up to 150 Mbps | ||||||||||||
| 802.11a |
up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency |
5 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
This section is empty. You can help by adding to it. (June 2020) |
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2020) |
Reverting
This section is empty. You can help by adding to it. (June 2020) |
JTAG-Serial Info
JTAG
This section is empty. You can help by adding to it. (June 2020) |
Serial
Serial Pinouts
Header pins were not populated as they appear in the FCC photo.
Boot Log
| boot log
|
|---|
U-Boot 1.1.3 (Jun 10 2014 - 18:41:01)
Board: Ralink APSoC DRAM: 64 MB
relocate_code Pointer at: 83f98000
enable ephy clock...done. rf reg 29 = 5
SSC disabled.
spi_wait_nsec: 29
spi device id: c2 20 17 c2 20 (2017c220)
find flash: MX25L6405D
MAC: 6c:19:8f:ed:f0:f6
==============================
Ralink UBoot Version: 4.1.1.0
DIR-810L(1.00b03)
------------------------------
ASIC 7620_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Jun 10 2014 Time:18:41:01
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
##### The CPU freq = 580 MHZ ####
estimate memory size =64 Mbytes
3: System Boot system code via Flash.
## Booting image at bc170000 ...
Image Name: Linux Kernel Image
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 6047003 Bytes = 5.8 MB
Load Address: 80000000
Entry Point: 8000c2d0
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000c2d0)
## Giving linux memsize in MB, 64
Starting kernel ...
LINUX started...
THIS IS ASIC
init started: BusyBox v1.12.1 (2014-06-11 14:51:50 CST)
starting pid 35, tty '': '/etc_ro/rcS'
mount: mounting none on /proc/bus/usb failed: No such file or directory
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___| || |__| || |__ __ | \| || |/ /
| _ /| _ || || || |\ || \
|__| \__\|__| |__||______||__||_| \____||_|\___\
=System Architecture Department=
mount mydlink ok
mount flash ok
old language pack not found
language pack exists
Starting loop GPIO LED=9,PBC=2
Waiting for Wireless Events from interfaces...
[ leobox_ipc.c: 207 sem_create()]:::add semid = 0
[ leobox_ipc.c: 207 sem_create()]:::add semid = 32769
[ leobox_ipc.c: 207 sem_create()]:::add semid = 65538
[ leobox_ipc.c: 207 sem_create()]:::add semid = 98307
[ leobox_ipc.c: 207 sem_create()]:::add semid = 131076
[ leobox_ipc.c: 207 sem_create()]:::add semid = 163845
[ leobox_ipc.c: 207 sem_create()]:::add semid = 196614
[ leobox_ipc.c: 207 sem_create()]:::add semid = 229383
[ leobox_ipc.c: 207 sem_create()]:::add semid = 262152
[ leobox_ipc.c: 207 sem_create()]:::add semid = 294921
[ leobox_ipc.c: 207 sem_create()]:::add semid = 327690
[ leobox_ipc.c: 207 sem_create()]:::add semid = 360459
[ leobox_ipc.c: 207 sem_create()]:::add semid = 393228
[ leobox_ipc.c: 207 sem_create()]:::add semid = 425997
[ leobox_ipc.c: 207 sem_create()]:::add semid = 458766
[ leobox_ipc.c: 207 sem_create()]:::add semid = 491535
[ leobox_ipc.c: 207 sem_create()]:::add semid = 524304
[ leobox_ipc.c: 207 sem_create()]:::add semid = 557073
[ leobox_ipc.c: 207 sem_create()]:::add semid = 589842
[ leobox_ipc.c: 207 sem_create()]:::add semid = 622611
[ leobox_ipc.c: 207 sem_create()]:::add semid = 655380
[ 122 ncc_main.c : 177 main()]
:::[122]Thread Create[main thread]
[ 122 ncc_runtimecfg.c : 538 initRunTimeCfg()]
:::Init Run-Time Config Success.
[ 122 ncc_runtimecfg.c : 539 initRunTimeCfg()]
:::Total 4470 nodes, each node 24 bytes.
[ 122 ncc_runtimecfg.c : 540 initRunTimeCfg()]
:::Total 107280 byte for all nodes.
[ 122 ncc_runtimecfg.c : 541 initRunTimeCfg()]
:::Total 68493 byte for data.
[ 122 ncc_runtimecfg.c : 207 loadCfg()]
:::Start loadCfg
[ 122 ncc_lz77.c : 534 flash2rootfs()]
:::Load Success(/var/tmp/cfg.txt)
[ 122 ncc_runtimecfg.c : 990 setObjToDefault()]
:::set IGD_FirmwareStatus_[1,1,0,0,0] to default
/etc_ro/rcS: line 163: mp.sh: not found
starting pid 140, tty '/dev/ttyS1': '/bin/sh'
# [ 122 ncc_inf.c : 1132 ncc_inf_main()]
:::JTraceLevel=4
[ 122 leobox_network.c : 1083 socket_select()]
:::Enter pid=122,ppid=1
[leobox_network.c: 1093 socket_select()]
:::main process get thread id=1026
[ 142 leobox_network.c : 835 socket_select_hdlr()]
:::[142]Thread Create[socket_select_hdlr]
[ 143 ncc_inf.c : 959 processInf()]
:::[143]Thread Create[processInf]
================nice=-20
bind: Address already in use
[ 122 ncc_main.c : 269 main()]
:::Stop Web Access HTTP
[ 122 ncc_httpd.c : 539 httpdOp()]
:::st is null.
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 5095
probeHTTPsEnable()]:::probeHTTPsEnable();
[ 122 ncc_main.c : 291 main()]
:::Start HTTPS
mini_httpd: started as root without requesting chroot(), warning only
sh: cannot create /sys/class/net/br0/bridge/tcp_allow: nonexistent directory
bind: Address already in use
[ 122 ncc_main.c : 305 main()]
:::Stop Web Access HTTPS
[ 122 ncc_httpd.c : 539 httpdOp()]
:::st is null.
mini_httpd: started as root without requesting chroot(), warning only
[ 157 leobox_timer.c : 235 timerThread()]
:::[157]Thread Create[timerThread]
[ 157 leobox_timer.c : 243 timerThread()]
:::Timer Thread Running
[ 158 ncc_main.c : 41 sendBootEvent()]
:::[158]Thread Create[sendBootEvent]
sh: cannot create /proc/sys/net/ipv4/conf/eth2.2/arp_ignore:
nonexistent directory
[ 122 ncc_fsm_boot.c : 513 Boot()]:::=====================Start DIR_810_Boot=====================
[ 122 ncc_fsm_boot.c : 570 Boot()]:::MAC 0 = 6C198FEDF0F6
[ 122 ncc_fsm_boot.c : 571 Boot()]:::MAC 1 = 6C198FEDF0F7
switch reg write offset=3100, value=56330
switch reg write offset=3200, value=56330
switch reg write offset=3300, value=56330
switch reg write offset=3400, value=56330
switch reg write offset=3000, value=56330
Set: phy[4].reg[4] = 05e1
Set: phy[4].reg[0] = 3300
[ 122 ncc_l2_independence.c: 171 swSpeedSet()]:::port = 4, speed = 0
killall: crond: no process killed
[ 122 ncc_crond.c : 54 crondConf()]:::DEBUG ON
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.
[ 122 ncc_firewall.c : 1572 reBuildMAC6()]:::reBuildMAC6()+
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.
[ 122 ncc_firewall.c : 1621 reBuildMAC6()]:::reBuildMAC6()-
ip6tables: No chain/target/match by that name.
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8098
probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec
[ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8175
probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec
readInfo(InfoV6AutoDetectWanType):0
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8215
probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec
[ 122 ncc_firewall.c : 2236 reBuildFirewall6CPE()]:::
[Bernie debug]:tmpPreiapd =
[ 122 ncc_firewall.c : 2237 reBuildFirewall6CPE()]:::
[Bernie debug]: prepare set cpe-dynamic rule
[ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
killall: wakeOnLanProxy: no process killed
[ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start===
[ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end===
[SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]
:::[nfOpFunc]Finish nf_init, 0
[ 122 ncc_fsm_boot.c : 780 Boot()]:::cfg->tzone=-128
Sat Jan 1 00:00:00 GMT 2011
[ 122 ncc_fsm_boot.c : 806 Boot()]:::Merge language pack!!
[ 4370 lang_merge.c : 1153 main()]:::before print info
[ 4370 lang_merge.c : 1156 main()]:::Parameters:
ori_lang_fp: /var/tmp/lang.js
def_lang_fp: /www/def_lang.js
[ 4370 lang_merge.c : 1234 main()]:::save to old js file!!
[ 4370 lang_merge.c : 1235 main()]:::save to old js file!!
[ 4370 lang_merge.c : 1236 main()]:::save to old js file!!
sh: cannot create /proc/sys/net/ipv6/conf/ra1/disable_ipv6: nonexistent directory
sh: cannot create /proc/sys/net/ipv6/conf/rai1/disable_ipv6: nonexistent directory
[ 122 ncc_status.c : 1211 delIfaceInfo()]:::delIfaceInfo()+:iface:br0
[ 122 ncc_routerlan.c : 37 attachWanDomainName()]:::Get wan interface fail!!
[ 122 ncc_routerlan.c : 37 attachWanDomainName()]:::Get wan interface fail!!
[ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1
llmnr: have no available linklocal address. wait count=0
[ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start===
[ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end===
[SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]:::[nfOpFunc]Finish nf_redirect_to_index_on, 47
[ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start===
llmnr: have no available linklocal address. wait count=1
[ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end===
[SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]:::[nfOpFunc]Finish nf_lan_up, 3
[ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1
[ 122 ncc_mdns.c : 173 mdnsConf()]:::hnf=0
llmnr: have no available linklocal address. wait count=2
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1
Jan 1 00:00:06 miniupnpd[6375]: could not open lease file:
/tmp/upnp_rdr_list
Jan 1 00:00:06 miniupnpd[6375]: HTTP listening on port 65530
No IPv6 address found for interface br0.
Jan 1 00:00:06 miniupnpd[6375]: no HTTP IPv6 address
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
Jan 1 00:00:06 miniupnpd[6375]: [truncated] m
mDNSResponderPosix: Starting in daemon mode
killall: lld2d: no process killed
***** g_wl_interface = ra0 ******
killall: proxy: no process killed
[ leobox_ipc.c: 207 sem_create()]:::add semid = 688149
[ 6392 lanmapd.c : 2648 main()]
:::=======Lanmapd=====
[ 6392 lanmapd.c : 2649 main()]:::iface br0
[ 6392 lanmapd.c : 2650 main()]:::ip 192.168.0.1
[ 6392 lanmapd.c : 2652 main()]:::ipAlias 192.168.0.1
[ 6392 lanmapd.c : 2654 main()]:::netmask 255.255.255.0
[ 6392 lanmapd.c : 2655 main()]:::network id 192.168.0.0
[ 6392 lanmapd.c : 2656 main()]:::mac 6c:19:8f:ed:f0:f6
[ 6392 lanmapd.c : 2657 main()]:::hostname dlinkrouter
[ 6392 lanmapd.c : 2658 main()]:::hostname encode
EEEMEJEOELFCEPFFFEEFFCCACACACAAA
[ 6392 lanmapd.c : 2660 main()]:::aliasname shareport
[ 6392 lanmapd.c : 2661 main()]:::aliasname encode
FDEIEBFCEFFAEPFCFECACACACACACAAA
[ 6392 lanmapd.c : 2663 main()]:::========================
llmnr: have no available linklocal address. wait count=3
killall: crond: no process killed
killall: wscd: no process killed
Starting loop GPIO LED=9,PBC=2
[ 122 ncc_fsm_boot.c : 307 doRtInit()]
:::Send Event to open 2.4G Wlan !
[ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched
llmnr: have no available linklocal address. wait count=4
llmnr: have no available linklocal address. wait count=5
llmnr: have no available linklocal address. wait count=6
llmnr: have no available linklocal address. wait count=7
llmnr: have no available linklocal address. wait count=8
llmnr: have no available linklocal address. wait count=9
[ 122 ncc_fsm_boot.c : 312 doRtInit()]
:::Send Event to open 5G Wlan !
[ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched
llmnr: have no available linklocal address. wait count=10
llmnr: have no available linklocal address. wait count=11
llmnr: have no available linklocal address. wait count=12
Starting loop GPIO LED=9,PBC=2
llmnr: have no available linklocal address. wait count=13
killall: wscd: no process killed
route: ioctl 0x890b failed: File exists
libupnp: using UDP SSDP_PORT = 1900
brctl: bridge br0: Device or resource busy
brctl: bridge br0: Device or resource busy
[ 122 ncc_fsm_boot.c : 923 Boot()]:::wanCableLink = 0
[ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1
[ 122 ncc_mdns.c : 173 mdnsConf()]:::hnf=0
mDNSResponderPosix: Starting in daemon mode
[ 122 ncc_dev_independence.c: 3892 devOpFunc()]:::get internet_cable_lose
[ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start===
[ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end===
[SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]
:::[nfOpFunc]Finish nf_80_to_404_on, 38
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8069 probeULA()]:::probeULA
[ 122 ncc_help.c : 2307 copy_mac_to_eui64()]:::v6id:6e19:8fff:feed:f0f6,
[ 122 ncc_help.c : 2191 read_ipv6addr()]
::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9
[ 122 ncc_help.c : 2209 read_ipv6addr()]
::: + fe80::6e19:8fff:feed:f0f6
[ 122 ncc_help.c : 2953 generate_default_ULA()]
:::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!!
[ 122 ncc_help.c : 2996 generate_default_ULA()]
:::Default ULA prefix => fd68:09d9:84e2::
[ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8098
probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec
[ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8175 probeFirewall6_SimpSec()]
:::<<probeFirewall6_SimpSec readInfo(InfoV6AutoDetectWanType):0
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8215 probeFirewall6_SimpSec()]
:::<<probeFirewall6_SimpSec
ip6tables: Bad rule (does a matching rule exist in that chain?).
[ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 6528 probeIPv6Radvd()]
:::cfg->isdomainstatic = FALSE
[ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 6934 probeIPv6Radvd()]:::MTU: 1500
[ 122 ncc_help.c : 2191 read_ipv6addr()]
::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9
[ 122 ncc_help.c : 2209 read_ipv6addr()]
::: + fe80::6e19:8fff:feed:f0f6
[ 122 ncc_help.c : 2953 generate_default_ULA()]
:::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!!
[ 122 ncc_help.c : 2996 generate_default_ULA()]
:::Default ULA prefix => fd68:09d9:84e2::
[ 122 ncc_fsm_boot.c : 1114 Boot()]:::
llmnr: have no available linklocal address. wait count=14
llmnr: have no available linklocal address. wait count=15
[ 122 ncc_help.c : 1952 is_v6defaultgw_exist()]
:::[IPv6 WARNING] Default GW not Exist.
[ 122 ncc_radvd.c : 114 radvdConf()]
:::MTU: 1500
[ 122 ncc_radvd.c : 143 radvdConf()]
:::IPV6 WARNING: LAN RADVD default lifetime is 0 due to NULL prefix.
[ 122 ncc_radvd.c : 233 radvdConf()]
:::is6rdsunset: 0, prefix:
[ 122 ncc_radvd.c : 70 radvdStart()]:::radvdStart -1
[ 122 ncc_dev_v6_independence.c: 3217 devV6OpFunc()]:::pd_hint set IPv6
[ 122 ncc_dev_v6_independence.c: 3288 devV6OpFunc()]
:::0:0:0:0:0:0:0:0, 56, 0, 0
[ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[ 122 ncc_status.c : 1273 delIfaceInfo6()]:::delIfaceInfo6()+:match iface:br0
[ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[ 122 ncc_fsm_boot.c : 1299 Boot()]
:::setting v6Lan Host Filter=fe80:0:0:0:6e19:8fff:feed:f0f7!
[ 122 ncc_fsm_boot.c : 1321 Boot()]
:::===finish DIR_810_Boot===
[SYS][ 122 ncc_fsm_boot.c : 1336 Boot()]:::Boot Complate!!
[ 122 ncc_EventInternal.c : 1189 doEventInternal()]:::InternalLocalTimeChange
[ 122 ncc_EventInternal.c : 501 onMailSchedule()]
:::mailCfg.schedSendEnable ? 0
[ 122 ncc_EventInternal.c : 1208 doEventInternal()]:::needSendLog = 0
[ 122 ncc_rt5592_wlan.c : 3083 rt5592_wlan_Stop()]:::kill wscd 2.4g
[ 122 ncc_objAction.c : 2084 ResetWirelessCounter()]:::DEBUG ON
[ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched
cat: can't open '/var/run/wscd.pid.rai0': No such file or directory
kill: you need to specify whom to kill
rm: cannot remove '/var/run/wscd.pid.rai0': No such file or directory
libupnp: using UDP SSDP_PORT = 1900
brctl: bridge br0: Device or resource busy
brctl: bridge br0: Device or resource busy
Starting loop GPIO LED=9,PBC=2
route: ioctl 0x890b failed: File exists
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1
libupnp: using UDP SSDP_PORT = 1900
[ 122 ncc_rt5592_wlan.c : 3099 rt5592_wlan_Stop()]:::kill wscd 5g
[ 122 ncc_objAction.c : 2098 ResetWirelessCounter()]:::DEBUG ON
[ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched
Starting loop GPIO LED=9,PBC=2
route: ioctl 0x890b failed: File exists
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1
|
Serial Recovery
This section is empty. You can help by adding to it. (June 2020) |
USB Info
This section is empty. You can help by adding to it. (June 2020) |
vlan Info
This section is empty. You can help by adding to it. (June 2020) |
Pictures
Notes
This section is empty. You can help by adding to it. (June 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2020) |
See also
This section is empty. You can help by adding to it. (June 2020) |
Categories:
- D-Link
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7620A
- Manuf Cameo
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7610E
- Embedded System IEEE 802.11a/n/ac
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- MediaTek
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation