D-Link DCH-G021
From TechInfoDepot
Jump to navigationJump to search
bgn (N150) | |
|---|---|
| Staples Connect Hub powered by D-Link | |
| Homepage | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
D-Link DCH-G021 |
| Serial number prefix |
SF |
| FCC ID | |
| Type |
smart home hub |
| CPU1 |
Marvell 88F6W11 |
| Flash1 Chip |
Micron MT29F2G08ABAEA |
| Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Winbond W632GG6KB-15 |
| ETH chip1 |
Marvell 88F6W11 |
| ETH chip2 |
Marvell 88E3019 |
| Ethernet Port Count |
1-100MbE-LAN |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
| JTAG Port |
yes, 20-pin header, unpopulated, J15 |
|
Flags: bluetooth, RTC w/ battery backup, ZigBee, Z-Wave | |
|
Additional chips | |
| Other | |
|
| |
| Manuf/OEM/ODM |
PloTech |
| Retail | |
| Availability | End of Life |
| FCC approval date | 07 October 2014 |
| (Est.) release date | December 2014 |
| (Est.) initial retail price (in USD): | $79.99 |
| UPC |
790069407031 (UPC DB, On eBay) |
| ASIN |
B0156YFPH2 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Radio1 module |
unknown |
| Radio1 module IF |
SDIO 2.0 |
| Chip1 |
Marvell 88W8777 |
| Wireless interface OUI |
70:62:B8 |
| Antenna Connector Type |
int. antenna |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented D-Link device with specifications, see D-Link.
Overview
This section is empty. You can help by adding to it. (October 2019) |
Links of Interest
This section is empty. You can help by adding to it. (October 2019) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2019) |
Reverting
This section is empty. You can help by adding to it. (October 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2019) |
USB Info
This section is empty. You can help by adding to it. (October 2019) |
vlan Info
This section is empty. You can help by adding to it. (October 2019) |
Pictures
This section is empty. You can help by adding to it. (October 2019) |
Notes
This section is empty. You can help by adding to it. (October 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2019) |
See also
This section is empty. You can help by adding to it. (October 2019) |
Categories:
- D-Link
- Embedded system/smart home hub
- Embedded System Marvell
- Embedded System 88F6W11
- Embedded System 88E3019
- Manuf PloTech
- Embedded System 88W8777
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Marvell
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation