Ctek G6200 NetServer
From TechInfoDepot
Revision as of 04:03, 26 October 2022 by ShadowBot (talk | contribs) (→Hardware Modification: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols)
| G6200 Series NetServer | |
| Homepage | |
|---|---|
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Ctek G6200 NetServer |
| Type |
automation controller |
| CPU1 |
Atmel AT91SAM9G20 |
| CPU1 Speed |
202 MHz |
| Flash1 Chip |
Atmel 45DB642D-CNU |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI NOR) |
| Flash2 Chip |
Micron Model? |
| Flash2 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
AMIC A43L4616AV-7UF x 2 |
| ETH chip1 |
Atmel AT91SAM9G20 |
| ETH chip2 |
Davicom DM9161 |
| ETH chip3 |
SMSC LAN9500i |
| Ethernet Port Count |
2-100MbE-LAN |
|
Ethernet OUI: 00:06:EB | |
| Stock bootloader |
U-Boot 2009.06 |
| Stock FW OS |
Linux 2.6.27 |
| Expansion IF types |
USB 2.0, Micro SD Card slot |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Power |
9-24 VDC, ? A |
| Connector type |
terminal block |
| Serial Port (UART) |
yes, DE-9, (38400,8,N,1), ttyS2 |
|
Flags: RTC w/ battery, RS232, RS485 | |
|
Additional chips | |
| Other | |
|
Default IP address: 192.168.1.10 | |
| Manuf/OEM/ODM |
Ctek |
| Retail | |
| Country of manuf | USA |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Davicom chipsets with specifications, see Davicom.
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
Overview
Hardware specification
- CPU: Atmel AT91SAM9G20 @ 202 MHz
- Memory: 64MB
- Onboard Storage: 8MB SPI NOR, 256MB NAND, MicroSD
- Network: 2x FE
- USB: 1x USB 2.0 Host, 1x USB Device
- Serial: 2x RS232, 2x RS485
Links of Interest
This section is empty. You can help by adding to it. (July 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2021) |
Reverting
This section is empty. You can help by adding to it. (July 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2021) |
USB Info
This section is empty. You can help by adding to it. (July 2021) |
vlan Info
This section is empty. You can help by adding to it. (July 2021) |
Pictures
This section is empty. You can help by adding to it. (July 2021) |
Notes
This section is empty. You can help by adding to it. (July 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2021) |
See also
This section is empty. You can help by adding to it. (July 2021) |
Categories:
- Ctek
- Embedded system/automation controller
- Embedded System Atmel
- Embedded System AT91SAM9G20
- Embedded System Davicom
- Embedded System DM9161
- Embedded System SMSC
- Embedded System LAN9500i
- Manuf Ctek
- Wired Embedded System
- Atmel
- Davicom
- SMSC
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation