Cisco WAP131
From TechInfoDepot
Jump to navigationJump to searchabgn | |
|---|---|
| Wireless-N Dual Radio Access Point with PoE | |
| Wikipedia | |
| Platform | |
| Brand • Model • Rev |
Cisco WAP131 |
| FCC ID | |
| IC ID | |
| Type |
access point |
| Wireless class |
AN600 |
| CPU1 |
Broadcom Model? |
| Flash1 Chip |
Micron MT29F1G08ABAEA |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
Samsung Model? |
| ETH chip1 |
Broadcom Model? |
| ETH chip2 |
Broadcom Model? |
| Ethernet Port Count |
1-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| PoE |
802.3af, standard |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
| Serial Port (UART) |
probably |
| JTAG Port |
probably |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.245 |
| Default login user |
cisco |
| Default login password |
cisco |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 04 July 2014 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Broadcom Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"2976468401" is silkscreened on the board in the FCC photos.
- The RAM chip used seems to be a 128 MiB K4x1G164QF series chip, the SoC used looks to be BCM4749
Default settings are per the FCC manual.
Links of Interest
This section is empty. You can help by adding to it. (April 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (April 2022) |
Reverting
This section is empty. You can help by adding to it. (April 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (April 2022) |
USB Info
This section is empty. You can help by adding to it. (April 2022) |
vlan Info
This section is empty. You can help by adding to it. (April 2022) |
Pictures
This section is empty. You can help by adding to it. (April 2022) |
Notes
This section is empty. You can help by adding to it. (April 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (April 2022) |
See also
This section is empty. You can help by adding to it. (April 2022) |
Categories:
- Cisco
- Embedded system/access point
- Embedded System Broadcom
- Manuf Delta Networks
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation