Cisco RAN201
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| Wireless-N Home ADSL2+ Modem Router | |
| Wikipedia | |
| Platform | |
| Brand • Model • Rev |
Cisco RAN201 |
| FCC ID | |
| Type |
wireless router, dsl modem |
| Wireless class |
N150 |
| CPU1 |
Ralink RT3050 |
| CPU2 |
Infineon PSB 50600 |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| Flash2 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip |
EtronTech EM638165TS-6G |
| RAM2 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM2 Chip |
EtronTech EM63A165TS-6G |
| ETH chip1 |
Ralink RT3050 |
| Switch |
Ralink RT3050 |
| Ethernet Port Count |
4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Flags |
ADSL2+ |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.1 |
| Default login user |
admin |
| Default login password |
admin |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 22 September 2010 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Ralink RT3050 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
"YQN00D-1.6" and the Cisco logo is silkscreened on the board in the FCC photos.
- The same SerComm text is found on the Linksys WAG120N's (FCC EUT) board.
Default settings are per the FCC manual.
Wi-Fi Certified : WFA8759 (as of 02/24/2010)
Links of Interest
This section is empty. You can help by adding to it. (April 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (April 2022) |
Reverting
This section is empty. You can help by adding to it. (April 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (April 2022) |
USB Info
This section is empty. You can help by adding to it. (April 2022) |
vlan Info
This section is empty. You can help by adding to it. (April 2022) |
Pictures
This section is empty. You can help by adding to it. (April 2022) |
Notes
This section is empty. You can help by adding to it. (April 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (April 2022) |
See also
This section is empty. You can help by adding to it. (April 2022) |
Categories:
- Cisco
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Ralink
- Embedded System RT3050
- Embedded System Infineon
- Embedded System PSB 50600
- Manuf SerComm
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Ralink
- Infineon
- Embedded System
- Wi-Fi Certified
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation