Cisco ISB7105
From TechInfoDepot
Jump to navigationJump to searchan | |
|---|---|
| Internet Protocol Set Top Box Basic SD/HD with WiFi | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Cisco ISB7105 |
| FCC ID | |
| IC ID | |
| Type |
set top box |
| Wireless class |
N300 |
| CPU1 |
Broadcom BCM7413 |
| CPU1 Speed |
400 MHz ( 2 cores ) |
| CPU2 |
Quantenna QT2018BC |
| CPU2 Speed |
400 MHz |
| Flash1 Chip |
Spansion Model? |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| Flash2 Chip |
Samsung K9F1G08U0D-SCB0 |
| Flash2 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Winbond Model? x 2 |
| RAM2 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| ETH chip1 |
Broadcom BCM7413 |
| ETH chip2 |
Marvell Model? |
| Ethernet Port Count |
1-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
| Flags |
HDMI out |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 10 December 2012 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Quantenna QT2018BC |
| Chip2 |
Quantenna QT2518B |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x4:4 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
Overview
This device would be presumed to be paired with the Cisco VEN501.
- The Cisco logo, "3763-40000403R", and "ES1.2" is silkscreened on the main board.
- The Cisco logo and "3753-21200103R" is silkscreened on the wireless module.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- Cisco
- Embedded system/set top box
- Embedded System Broadcom
- Embedded System BCM7413
- Embedded System Quantenna
- Embedded System QT2018BC
- Embedded System Marvell
- Manuf CyberTAN
- Embedded System QT2518B
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Quantenna
- Marvell
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation