Cisco AP541N
From TechInfoDepot
Jump to navigationJump to searchabgn | |
|---|---|
|
Cisco Small Business Pro AP500 Dual Band Single Radio Access Point | |
| Homepage | |
| Wikipedia | |
| Platform | |
| Brand • Model • Rev |
Cisco AP541N |
| FCC ID | |
| IC ID | |
| Type |
access point |
| Wireless class |
AN600 |
| CPU1 |
Brand? Model? |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Samsung Model? |
| ETH chip1 |
Brand? Model? |
| Ethernet Port Count |
1-1GbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
Mini PCI |
| Mini PCI slots |
1 |
| Power |
12 VDC, 1.25 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, internal, 4-pin header, 3.3V TTL |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.10.10 |
| Default login user |
cisco |
| Default login password |
cisco |
| Default SSID |
cisco-data, cisco-voice |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 25 September 2009 |
| ASIN |
B002Z2W9N2 |
| Country of manuf | China |
| Radio 1 | |
| Radio1 module |
unknown |
| Radio1 module IF |
Mini PCI |
| Chip1 |
Broadcom BCM4342 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/b/g/n |
| 802.11n |
up to 300/300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
2.4 or 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"2976336001" is silkscreened on the main board in the FCC photos.
- "2976306603" is silkscreened on the wireless module.
- The PBGA CPU and GbE PHY are covered w/ heatsinks, but are likely both Broadcom silicon
Per Cisco's datasheet, this device has 32 MB Flash and 64 MB RAM.
Default settings are per the FCC manual - they may be inaccurate..
Wi-Fi Certified : WFA7506 (as of 07/06/2009)
Probable used PSU(s)
The power supply shown in the FCC external photos is a DVE DSA-15P-12 US 120150.
| DVE DSA-15P-12 US 120150 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC, 0.5 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Eff. level: 4 | |||||
| Output: 12 VDC, 1.25 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (April 2022) |
Reverting
This section is empty. You can help by adding to it. (April 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (April 2022) |
USB Info
This section is empty. You can help by adding to it. (April 2022) |
vlan Info
This section is empty. You can help by adding to it. (April 2022) |
Pictures
This section is empty. You can help by adding to it. (April 2022) |
Notes
This section is empty. You can help by adding to it. (April 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (April 2022) |
See also
This section is empty. You can help by adding to it. (April 2022) |
Categories:
- Cisco
- Embedded system/access point
- Manuf Delta Networks
- Embedded System Broadcom
- Embedded System BCM4342
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Dual-Band
- Broadcom
- Embedded System
- Wi-Fi Certified
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation