Cellvision WBA-200
From TechInfoDepot
Revision as of 16:28, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| bridge | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Cellvision WBA-200 |
| FCC ID | |
| Type |
bridge |
| Wireless class |
B11 |
| CPU1 |
Texas Instruments Model? |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Texas Instruments Model? |
| ETH chip2 |
Kendin KS8721B |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
Mini PCI |
| Mini PCI slots |
1 |
| Power |
5 VDC, 2.5 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.0.30 |
| Default login user |
admin |
| Default login password |
Leave blank |
| Manuf/OEM/ODM |
Global Sun GL2422AP-6T3-B10 T1.2 |
| Retail | |
| FCC approval date | 29 July 2003 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Radio1 module | |
| Radio1 module IF |
Mini PCI |
| Chip1 | |
| Chip2 |
RFMD Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
This is the same hardware as the D-Link DWL-800AP+ rev A1.
Default credentials are from the FCC provided manual.
The FCC test report lists the following as additional models..
- Cellvision WRA-200
- CenDyne CDINW00214
- CenDyne CDINW00215
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- Cellvision
- Embedded system/bridge
- Embedded System Texas Instruments
- Embedded System Kendin
- Embedded System KS8721B
- Manuf Global Sun
- Embedded System ACX100
- Embedded System RFMD
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Texas Instruments
- Kendin
- RFMD
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation