Celeno VXT1836
From TechInfoDepot
Jump to navigationJump to searchan | |
|---|---|
|
VXT1836 Wireless Video Extender Kit Video Bridge Unit | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Celeno VXT1836 |
| FCC ID | |
| Type |
access point, station |
| Wireless class |
A450 |
| CPU1 |
Celeno-Ralink CL1830 |
| Flash1 Chip |
Macronix MX29LV640EBTI-70G |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Nanya NT5TU32M16CG-25C |
| ETH chip1 |
Celeno-Ralink CL1830 |
| ETH chip2 |
IC+ IP101A |
| ETH chip3 |
IC+ IP101A |
| Ethernet Port Count |
2-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Default login user |
admin |
| Default login password |
admin |
| Manuf/OEM/ODM |
Zinwell ZW-N5000 |
| Retail | |
| FCC approval date | 10 May 2013 |
| Radio 1 | |
| Chip1 |
Celeno-Ralink CL1830 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
3x3:3 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 450 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
Overview
"ZW-N5000 Ver:05" is silkscreened on the board in the FCC photos.
- The device appears to be using three Skyworks (SiGe) SE5012T / 5012T 5GHz FEMs.
Per the FCC manual...
- The default credentials are admin:admin
- In AP mode..
- Default IP of 10.0.0.2 (w/ 255.0.0.0 Net Mask) *In STA mode..
- Default IP of 10.0.0.10 (w/ 255.0.0.0 Net Mask)*The default SSID pattern shown as an example is VXT1800'''XXXXXX
- XXXXXX is the last three octets of the BSSID (upper case letters)
- There are a fair number of hits for this pattern on WiGLE (93 w/ 80:1F:02 [Edimax] OUIs)
- The actual SSID pattern may be VXT1836'''XXXXXX
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- Celeno
- Embedded system/access point
- Embedded system/station
- Embedded System Celeno-Ralink
- Embedded System CL1830
- Embedded System IC+
- Embedded System IP101A
- Manuf Zinwell
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Celeno-Ralink
- IC+
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation