Celeno VXT1300
From TechInfoDepot
Jump to navigationJump to searchan | |||||
|---|---|---|---|---|---|
| access point,bridge | |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
Celeno VXT1300 | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
access point, bridge | ||||
| Wireless class |
A300 | ||||
| CPU1 |
Celeno CL1300 | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
? MiB | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 |
Celeno CL1300 | ||||
| ETH chip2 |
IC+ IP101A | ||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
| Expansion IF types |
none specified | ||||
| Power |
12 VDC, ? A | ||||
| Connector type |
barrel | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
10.0.0.2 | ||||
| Retail | |||||
| FCC approval date | 04 November 2009 | ||||
| Radio 1 | |||||
| Chip1 |
Celeno CL1300 | ||||
| Chip2 |
Maxim MAX2828 | ||||
| Chip3 |
Maxim MAX2828 | ||||
| Wireless interface OUI |
00:0B:8C | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11a/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11a |
up to 54 Mbps | ||||
| WiFi Operating Frequency |
5 GHz | ||||
| |||||
For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Maxim chipsets with specifications, see Maxim.
Overview
- The Celeno logo, "Patent Pending Celeno Proprietary", "CELENO VXT1300 AP", and "P/N BOARD: PCB00020" is silkscreened on the board in the FCC photos.
- Per the FCC test report, the device "utilizes 4 internal printed antennas: two transmit and two receive".
The FCC manual states the default IP is 10.0.0.2.
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- Celeno
- Embedded system/access point
- Embedded system/bridge
- Embedded System Celeno
- Embedded System CL1300
- Embedded System IC+
- Embedded System IP101A
- Embedded System Maxim
- Embedded System MAX2828
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- IC+
- Maxim
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation