Cameo WLB-2000
From TechInfoDepot
Revision as of 16:26, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |||||
|---|---|---|---|---|---|
| Wireless LAN Access Point | |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
Cameo WLB-2000 | ||||
| FCC ID | |||||
| Type |
access point | ||||
| Wireless class |
B11 | ||||
| CPU1 |
Atmel AT76C510 | ||||
| Flash1 Chip |
Atmel AT29LV040A-20TI | ||||
| Flash1 Size |
0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> | ||||
| RAM1 Size |
0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> | ||||
| RAM1 Chip |
ISSI IS61LV5128-10T | ||||
| ETH chip1 |
Atmel AT76C510 | ||||
| ETH chip2 |
Realtek RTL8201BL | ||||
| Ethernet Port Count |
1-10MbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
5 VDC, 2.4 A | ||||
| Connector type |
barrel | ||||
|
Additional chips | |||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
???.???.???.??? | ||||
| Default login user |
Leave blank | ||||
| Default login password |
public | ||||
| Retail | |||||
| FCC approval date | 14 April 2003 | ||||
| Radio 1 | |||||
| Chip1 |
Atmel AT76C510 | ||||
| Chip2 |
RFMD RF3000 | ||||
| Chip3 |
RFMD Model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| Wireless Standard |
IEEE 802.11b | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
A date code of 0247 (November 2002) is silkscrened on the board in the FCC photos.
Some models may have RP-SMA connectors..
There is no HTTP configuration interface for this device. It is configurable via SNMP (with the included Windows utility).
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- Cameo
- Embedded system/access point
- Embedded System Atmel
- Embedded System AT76C510
- Embedded System Realtek
- Embedded System RTL8201BL
- Embedded System RFMD
- Embedded System RF3000
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Atmel
- Realtek
- RFMD
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation