CNet CQR-980
From TechInfoDepot
Jump to navigationJump to searchbgn | |||||
|---|---|---|---|---|---|
| Wireless-N Pico Broadband Router | |||||
|
| |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
CNet CQR-980 | ||||
| FCC ID | |||||
| Type |
wireless router | ||||
| Wireless class |
N150 | ||||
| CPU1 | |||||
| Flash1 Chip |
Winbond 25Q16BVSIG | ||||
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Chip |
ESMT M12L128168A-6T | ||||
| ETH chip1 | |||||
| Ethernet Port Count |
1-WAN 1-100MbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
5 VDC, 0.5 A | ||||
| Connector type |
USB Female Mini-B | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
192.168.1.1 | ||||
| Default login user |
admin | ||||
| Default login password |
admin | ||||
| Default SSID |
CQR-980_XXXXXX | ||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 12 September 2010 | ||||
| Country of manuf | Taiwan | ||||
| Radio 1 | |||||
| Chip1 |
Realtek RTL8188RE | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
RP-SMA | ||||
| MIMO status |
1x1:1 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 150 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
There is no FCC ID printed on the label. The FCC ID of the parent model has been assigned to this device.
When set to function in AP mode, the device assumes the IP of 192.168.1.254.
"EPMBBR080NXXX2XX" is silkscreened on the board.
The default SSID follows the format of CQR-980_XXXXXX where XXXXXX is the last three octets of the WAN interface MAC with lower case letters.
The power adapter included with the device is a Keen Ocean Industrial S04-003-0050-00600 (5V, 0.5A).
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (April 2021) |
Reverting
This section is empty. You can help by adding to it. (April 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (April 2021) |
USB Info
This section is empty. You can help by adding to it. (April 2021) |
vlan Info
This section is empty. You can help by adding to it. (April 2021) |
Pictures
- external
- internal
Notes
This section is empty. You can help by adding to it. (April 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (April 2021) |
See also
This section is empty. You can help by adding to it. (April 2021) |
Categories:
- CNet
- Embedded system/wireless router
- Embedded System Realtek
- Embedded System RTL8196C
- Manuf E-TOP
- Embedded System RTL8188RE
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Realtek
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation