CNet CNAP-711

From TechInfoDepot
Revision as of 16:26, 5 September 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
b
11Mbps Wireless LAN Access Point
WikiDevi.wi-cat.ru
Platform
BrandModelRev
CNet CNAP-711
FCC ID
Type
access point
Wireless class
B11
CPU1
Atmel AT76C510
Flash1 Chip
Atmel AT29LV040A-20TI
Flash1 Size
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Chip
Alliance AS7C34096-10TC
ETH chip1
Atmel AT76C510
ETH chip2
Realtek RTL8201BL
Ethernet Port Count
1-10MbE-LAN

802dot11 OUI: 00:08:A1 (2 E, 10 W)
Ethernet OUI: 00:08:A1 (2 E, 10 W)

Expansion IF types
none specified
Power
5 VDC, 2.1 A
Connector type
barrel

Additional chips
Low-voltage CPLD;Atmel;ATF1504ASV;ATMEL, ATF1504ASV, 15AC44 0238;1;
HF LNA/Mixer;RFMD;RF2494;RF, 2494, 0241;1;
2.4GHz RF Synthesizer w/ Integrated VCOs;Silicon Labs;Si4126;SI4126, BM, 0239DC, EA21;1;
1.8GHz to 2.8GHz Linear Power Amplifier IC;RFMD;RF5117;RF, 5117, 24AC;1;

Categorized as
not categorized
Other
Default IP address
192.168.0.254
Default login user
Leave blank
Default login password
WLAN
Retail
FCC approval date 14 January 2003
Country of manuf Taiwan
Radio 1
Chip1
Atmel AT76C510
Chip2
RFMD RF3000
Chip3
RFMD RF2948B
Wireless interface OUI
00:08:A1
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

Overview

"Access Point", "05-01-0484-03", and a date code of 0246 (November 2012) is silkscreened on the board in the FCC photos.

This device would appear to only be configurable via SNMP. Default settings are per the FCC manual.

The sample SSID in the manual is WLAN_AP.

The power adapter shown in the FCC photos is a Spec Lin Enterprise Co., Ltd. SL15A205-U (100-240VAC ~ 50-60Hz, 0.5A max. -> 5VDC, 2.5A).

Additional specs, per the manual

Typical Receiver Sensitivity w/ 11b rates (10E^-5 BER) (more)

  • -85 dBm @ 1M
  • -81 dBm @ 11M

Links of Interest

Flashing

Upgrading

Reverting

JTAG-Serial Info

USB Info

vlan Info

Pictures

Notes

Hardware Modification

See also