CC&C WA-7200
From TechInfoDepot
Jump to navigationJump to searchbgn | |||||
|---|---|---|---|---|---|
|
WLAN 11n Router 11n Travel AP/Router | |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
CC&C WA-7200 | ||||
| FCC ID | |||||
| Type |
wireless router | ||||
| Wireless class |
N150 | ||||
| CPU1 |
Realtek RTL8196EU | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip |
Winbond W9825G6JH-6 | ||||
| ETH chip1 |
Realtek RTL8196EU | ||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
| Expansion IF types |
none specified | ||||
| Power |
5 VDC, 1 A | ||||
| Connector type |
USB Male-A | ||||
| Flags |
USB charging port, portable | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
192.168.1.254 | ||||
| Default SSID |
TravelXXX | ||||
| Retail | |||||
| FCC approval date | 25 July 2013 | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 |
Realtek RTL8188ER | ||||
| Wireless interface OUI |
00:02:72 | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
1x1:1 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 150 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"CC&C" and "WA-7215-V2" is silkscreened on the SoC board (SoC side) in the FCC photos.
- "10G032800-0P", "DATE:", and "CC&C" appears to be silkscreened on the opposite side of the SoC board.
The default IP is per the FCC manual.
- The default SSID pattern format appears to be TravelXXX, where XXX is the last three hex digits of the LAN MAC.
- The default SSID format (and OUI) is per the EUT's label in the FCC external photos.
Links of Interest
This section is empty. You can help by adding to it. (May 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2021) |
Reverting
This section is empty. You can help by adding to it. (May 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2021) |
USB Info
This section is empty. You can help by adding to it. (May 2021) |
vlan Info
This section is empty. You can help by adding to it. (May 2021) |
Pictures
This section is empty. You can help by adding to it. (May 2021) |
Notes
This section is empty. You can help by adding to it. (May 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2021) |
See also
This section is empty. You can help by adding to it. (May 2021) |
Categories:
- CC&C
- Embedded system/wireless router
- Embedded System Realtek
- Embedded System RTL8196EU
- Embedded System RTL8188ER
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation